I just contacted the vendors and asked to cancel the orders for stock parts lol. Should have researched more . Will be buying the pro design set up . Thanks for the help man. Hope the venders don't try and pull anything. Whoops
The set up is doing the same thing as the stock set up. Well it has a clamp that holds it to the flange . Guess it is a better set up over stock. Shit . Wish I seen that before I bought all OEM parts off eBay.
Just ordered all the parts needed to run a foam duel stage filter set up. Cage, uni filter, peice that goes at top of filter, some old PJ1 filter oil also. I don't trust the K&N in the dust I ride in . Consider that ditched .
Also noticed with throttle cracked on a roll it hesitates just like my YZ did with that stupid throttle position sensor set up. I adjusted air mixture screws on carbs after changing pre mix to 36:1. Ended up a two turns out on each . Come to find out that's what the manual calls for . The bike need choke to start when cold so pilot must be close or spot on. I need to look over the service manual and read about the stock carbs.
One thing I'm not use to any more is the ground clearance on these sport quads lol. My Polaris RZR 900 has 16in ground clearance with 3 inch lift and 30 mayhems .