Jump to content

Joeladm

Members
  • Posts

    83
  • Joined

  • Last visited

Everything posted by Joeladm

  1. Well I will admit that it ran the best today since the last adjustment, and the right plug was just a tad darker.
  2. it won't let me post another pic, but the right side looked better. My pilots are 30's, mains are 280's and I have Toomey needles and they have 6 slots and I have clip in the 4th one from top to bottom. Elevation 400 feet.
  3. Joeladm

    Carb slide clips

    $10. for the pair, shipped to you.
  4. Joeladm

    Carb slide clips

    ok, cause I had a set.
  5. Joeladm

    Carb slide clips

    I might have a set, check when I get home from work, live in Washington state.
  6. Here is the part # for that bolt, call Yamaha shop and see if they can give you details 98707-05012-00
  7. I know this probably has already been discussed, but I just want to give JDs a shout out. Thanks!
  8. The he slide that goes on the left side has a notch cut out on the top on both sides, front and back. The right side only has one side notched out.
  9. I have one I paid $2400. for sale but in Washington State, it's the big road chest. I wish you were closer, would have made something happen.
  10. Sounds like it's seized up, pull the heads and see if there is any scarring on the cylinder walls.
  11. Don't get your panties all waded Zilla!
  12. @ cary724 what kind of bumper is that you have on that badass looking Banshee?
  13. How's it running, get it figured out??
  14. If you have a thumb throttle, Yes. It comes with the one you use if you have TORS eliminated.
  15. here is a pic of the slide that goes in the left side
  16. The slide for the left carb has a slot cut on the top on the front and back side.
×
×
  • Create New...