Bikelife305

Pics?

32:1 ratio. I know it's a 2stroke but smoking way to much then what it support too then any other banshee next to me.

Here what's going on when I get on the thottle it puff a cloud of white smoke on both sides more on the leftside, motor has been sealed new main seals and no leak in cases not burning tranny oil or no coolant.smoke smell real strong like fuel..could it be that is time to rebore my cylinders? 150psi both side mods: ported 64mm cylinders, 35mm carbs, stock crank, CPI pipe,

my problem is my bike running rich... here what i have done CPI exhaust, Drag ported Stock cylinders, vforce 2, 35mm PWK carbs (set at: Main:152 Pilot:48 Needle:CGL) i can put a set of new plugs on my bike and ride it all day and the plug would Still look New out the box with no color also the exhaust tips has alot of unburnt fuel on idle it smoke alot on both pipes....... i have try goin smaller main jet to like a 148 But then my plugs gets white

Looking for a set of CPI silencers. PayPal ready

looking for both front OEM rims. in clean condition PAYPAL READY!!!!!!!!!!!

whats the best on tranny paypal Ready!!!

Looking for stock OEM Cylinder Nothing bigger then 65.00mm !!!!

Will check on that in the morning

I try two different coils.. but haven't check the pickup gap

I started the post with what I was getting first so I kept trying to troubleshoot it and I ran in to this new issue about the bike shutting off

No I'm pulling plug off the cold side that's Not running.

Carb are sync

Well it's cutting the whole bike off.... I try a different cdi and coil and still the same... could it be wire harness?

I'm having that issue on one side not starting till I hit the throttle then it would startup then on idle it back cold

Should the bike shut off when pulling one spark plug wire or would it just shut off the side that the wire was pulled off?

Should the bike shut off when pulling one spark plug wire or would it just shut off the side that the wire was pulled off?

but wont both side act up if it was a airleak???

Reed are good, where could i have a air leak? all gasket new, i sync them by the top caps on carbs.

i'm having a issue with my shee. the issue im having is that my right side while the bike on idle it stay cold as soon as i hit the throttle it fire right up on high rev but once i let go it feel like it shuts off while the left side stay running, carbs are sync good, both slider in the right way, Piston were Recent Changed, i have swap the plug wire ans the problem stay on that one side then i have swap carbs from the left to the right and the problem stays on the right side, i have rebuild carbs. both cylinders has same PSI. what Could it be please Help!!!

like the title say i need the two oem front rims

looking for a STOCK tranny complete.. maybe a override if the prinxe right Let me know.... also in need of a 64.25 piston..

i dnt give a fuk about the price but be real about your sell... if the first question i asked was Do you still have the tranny he could easily told me it in a pending sale ill you know and that would of end the whole conversation.... people just talk extra without know the real fact. and if you selling something there should be no problem with the buyer asking you 100 questions because its a buyer right to ask and is there money thats going to be spent on the item Dont matter if it a dollar im still going to ask all the questions i want.....

asked a few question about the transmission i was very interested as soon as i offer him 55 now he wants to tell me o someone want it but the person aint send the money yet if you aint like the offer just say no. then i said ill pay the 75 that you want now he dont wanna sell it to because i guess tryed to offer 55. then he wants to tell me if the guy back outhe would let me know.... SMFH money right here in paypal it should be first come first serve!

pm Sent!