Jump to content

BANSHEEBEEFM2M

Members
 View Profile  See their activity

  • Posts

    3,108

  • Joined

  • Last visited

  • Days Won

    8

 Content Type 

Everything posted by BANSHEEBEEFM2M

  1. BANSHEEBEEFM2M
    Yaaa
  2. BANSHEEBEEFM2M
    Ill send nudes for a discount
  3. BANSHEEBEEFM2M
    No i didnt... but was gonna buy them today
  4. BANSHEEBEEFM2M
    How can i contact noss?
  5. BANSHEEBEEFM2M
    Hes not familiar with rockets
  6. BANSHEEBEEFM2M
    Need a new set to get me by. Running a ss lr crank and blaster pistons. Do i need regular or big bore domes?
  7. BANSHEEBEEFM2M
    13/42 gearing +8 swinger how many links will i need? And im gonna go to 14/42 or 13/40 haven't found a perfect ratio yet. How many links? And who makes a good non o ring chain for a good price?
  8. BANSHEEBEEFM2M
    First of all are there r1s or r2s? . Have a alky 375 ss longrod motor. Having shift forks replaced, a drag port done and fresh pistons put in now . Shee was dune ported. Was running bb cpi inframes and shee really really ran hard. Will i gain or lose power goibg to these rockets? Are they hard to fit? Do they rub carbs head etc?
  9. BANSHEEBEEFM2M
    if there cpi ill take sb or bb if shearer only sb
  10. BANSHEEBEEFM2M
    This is a ? For my brothers shee. 421 cub. Left cylinder fires n sometimes Will just stop firing. And when it acts up it backfires when kicking it over. What could it be help me out guys gonna gather parts tonight and meet them in the am
  11. BANSHEEBEEFM2M
    no dents or dings for stock shee spindles
  12. BANSHEEBEEFM2M
    How good of shape is the crank in?
  13. BANSHEEBEEFM2M
    True
  14. BANSHEEBEEFM2M
    Everything such as crank, pistons, domes? Can they cut me a set of domes without having my jugs there?
  15. BANSHEEBEEFM2M
    Long rod or short rod?
  16. BANSHEEBEEFM2M
    Is longrod or short rod better for a drag only setup ?? Ya I seen a stock chassis with a red line 10 mill beat a 14mill in a chassis that empire built.
  17. BANSHEEBEEFM2M
    If I can't find a cub for a steal I'm gonna just go the 7 mill stock cylinder route
  18. BANSHEEBEEFM2M
    I have a set of stock cylinders that are at 64.00 but need to be bored. Unported was gonna start with those. Can u run 65 or 64.5 pistons with a 7 mill or do they need to have big bore sleeves put in?
  19. BANSHEEBEEFM2M
    Is it as much work to do a 7 mill stock cylinder?
  20. BANSHEEBEEFM2M
    A ten mill will only make 5 to 7 hp over a 421? How much hp can I get out of a drag ported alky stock cylinder 10 mill?
  21. BANSHEEBEEFM2M
    Idk... I'd like to stay under 2500 if possible
  22. BANSHEEBEEFM2M
    Tryna be like u taballa
  23. BANSHEEBEEFM2M
    That's not gonna break me. And if I buy a used cub and have it ported I'd have to recoat it again right?
  24. BANSHEEBEEFM2M
    Who makes a 10 mill crank that will hold up?
  25. BANSHEEBEEFM2M
    Ya... my boy has a drag ported alky ss cub and he'll only beat me by a bike or so... I need faster lol

BHQ Quick Links

×
×
  • Create New...