Jump to content

foxrider603

Members
  • Posts

    332
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by foxrider603

  1. Im running the same lights lol they dont look bad and work pretty good. Not bad for 17 bucks
  2. Just for a price guide these cost 85
  3. Looking for some after market banshee parts. Not really looking for anything in particular. The rotor is brand new never installed Sent from my DROIDX using Tapatalk 2
  4. I was thinking the old freezing water trick
  5. Would i notice any power gain over the gold series?
  6. And won't that dent affect performance?
  7. Are these any better then gold series?
  8. My realtors pure sports are good in just about any terrain except street riding
  9. So leave the clip on number 4i an go with a 30040 main?
  10. Ok according to the picture im at the number 4i clip
  11. Thats what u was thinking to so i droped the needle to tje second notch on bottom and took the air fuel screw alittle past 2and a half out. Should i set it to one and half /2 turns out?
  12. So should i try a 300 main? And what do you mean bean oil?
  13. My air box has not been modified. Im running a foam filter
  14. So im having some issues. It seems im having a mid throttle bog once it hits powerband its good not sure on what i should be doing new to jetting. My shee is completely stock other then fmf exhaust. Im running 270 mains with 27.5 pilot needle on 2nd clip on bottom and a little more then 2 an a half turns out on my air/fuel screw. Im 500ft above sea level and the temps range from 40 degrees and lower
  15. It sure is a shame people let them get that way
  16. I have no use for them but i know some states you can't run after market exhaust so some people have no other options but to run them
  17. Got a few stock parts laying around i dont need Stock exhaust 50+shipping Shifter 15 shipped Pegs 25 shipped Throttle cover 10 shipped Sent from my DROIDX using Tapatalk 2
  18. Are you sure the axle is bent ? I thought mine was bent come to find out my carrier bearings were bad
×
×
  • Create New...