mx1986

I bought carbs. Would you sell the bowls possibly?

Only sell if you have mikuni bowls

i have a set of chariot pwk billet bowls id like to trade for a set of chariot mikuni billet bows for tm34s. floats attach to bowl.

im looking for billet bowls for tm34 mikuni carbs, let me know what youve got. thanks

Looking for 34mm mikuni carbs. Alky or gas. Text me at 402-380-4714

I'm looking for some 34mm mikuni carbs. Text me at 4023804714

you think the pump is pushing past fuel?

Motor has rdz pipes and the ports have been cleaned up. Not sure on the needle will have to check it. The carbs came off a rmk 700 snowmobile that I drilled out the dumps and installed a powerjet setup for pulse pump. The domes are 17cc bought off ebay probably trinity can't remember.

.120 dumps

Also at about 900 feet a over sea level

I've got a 421 cub with 39mm pwks with a .109 main timing a +8 with 17cc shelf domes. I've got a digatron on the bike and still only getting to just under 1000 degrees with the pj's closed. I'm just curious to how small some of your guys main jets are to achieve that 1100 to 1300 egts. My plugs are still not even showing a heat mark. I went down from a .116 to a .109 and only picked up 70 degrees egts.

Bump

For sale Sbsf Rdz raw both out 1 side 350$ shipped Sbsf shearer nickle both out 1 side 375$ shipped Spindle mounts banshee taper 10x2 rims 325$ shipped +14 wheelman chassis ladder swingarm no link 250$ shipped +10 aero tube swingarm link setup nice chrome 275$ shipped 13 in rear marvin 150$ shipped 14.5 in marvins leak slowly last all summer 130$ shipped Text for pics phone won't upload 4023802298

Recently got a 10 mill cub that had some custom domes in it. They read 21 10 .018 on the stator side and 21 10 .022 on clutch side. I know what the numbers stand for I am just curious to why they are different then each other.

Bump still looking