ric-ross1

Pmd. Sent from my iPhone using Tapatalk

What condition are the shocks in? Sent from my iPhone using Tapatalk

Olive oil extra virgin is my choice, nice and smooth! Sent from my iPhone using Tapatalk

It was the last wire I had left from a long time ago, but I can tell you that it wasn’t thick, what’s the size are you supposed to use? Sent from my iPhone using Tapatalk

If you still have them PayPal ready.

I already installed the o rings on the head and torqued it down but motor hasn’t been ran, I should be ok or do I need new o rings? Yes, everything was supplied by the builder. Sent from my iPhone using Tapatalk

Is it not safe to run? Sent from my iPhone using Tapatalk

I didn’t like the numbers but builder said to run it, I finished putting the head on yesterday so I have a leak down test next, as far as compression test I won’t be able to get once for a few weeks due to the frame being gone for powder. Sent from my iPhone using Tapatalk

As per the builder I’m ok to run it. Gusto I already paid for those cut domes for the build.

The gasket set provided by builder. Driveline cool head. I will, J tried today but I’m sure they are busy with the Holliday’s. Thanks, trying to be done with putting it together and set it aside while I build frame. Might need more solder wire lol.

Got to put the motor together 4mil, did a squish test and I got 1.16mm and 1.06m, it’s got 23 4 mil domes which were sent by the builder for a pump gas set up. That numbers seems wrong.

T5 still available?

that but I’m pretty sure it’s supposed to go on the outside not the inside lol. Sent from my iPhone using Tapatalk

After some more digging I came to the conclusion that it’s a driveline head but they don’t make them anymore... Sent from my iPhone using Tapatalk

I'm looking for the 2 bolts that go from the motor mounts to the bottom of the cases.