Jump to content

hoppedupandcutdown

HQ Premium Member
 View Profile  See their activity

  • Posts

    3,462

  • Joined

  • Last visited

  • Days Won

    73

 Content Type 

Everything posted by hoppedupandcutdown

  1. hoppedupandcutdown
    or 1 1/4" if the metric is hard to find. (Actually my standard fits better than my metric)
  2. hoppedupandcutdown
    Remove the hose from the caliper, stick that end in your full rear brake reservoir, and pump away. When you get no more bubbles, quickly put it back on and then bleed normally.
  3. hoppedupandcutdown
    Are your slides in backwards?
  4. hoppedupandcutdown
    They are a about 3/4" short, and both are the same size tube. I'll check on shipping tomorrow, I have the box they came in, the guy I got them from sent them from back east to me, parcel post for about $30 I think.
  5. hoppedupandcutdown
    Or I would trade even up if money is an issue for you.
  6. hoppedupandcutdown
    I need to decide if I want the PT silencers, I bought a nice set of just pipes the other day. But, YES, I will take $100 +shipping for just the pipes, or $200 for the system if i decide to go that way. Tomorrow I'll figure out how I want to put it together.
  7. hoppedupandcutdown
    From what I've seen, you'd be lucky to even save a hundred on used over a new blem. Just watch their garage sale section for one.
  8. hoppedupandcutdown
  9. hoppedupandcutdown
    Bump, I could deliver to the HQ ride in Waynoka in Sept.
  10. hoppedupandcutdown
    I stumbled across these on Ebay http://www.ebay.com/itm/Yamaha-Banshee-Graphics-OEM/161088295517?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D17058%26meid%3D665423964585652907%26pid%3D100033%26prg%3D7917%26rk%3D1%26rkt%3D4%26sd%3D161088295517%26
  11. hoppedupandcutdown
    Another pic to show you how crappy they look.
  12. hoppedupandcutdown
    They look nickel plated but over rust pits? no rust showing though... they do look odd. PT with my Toomey T5 silencers, they are the exact same size, I have a 3/4 socket in there to line them up The PT silencers, they have an aluminum stinger with an aluminum sleeve attached to slide in the pipe.
  13. hoppedupandcutdown
    I've got a pair of PT mids to get rid of, no silencers, and rough. I'll get some pics, and see if they might work with Toomey silencers this weekend sometime.
  14. hoppedupandcutdown
    Might actually be to rich for your elevation. I run 280's at 1100 ft.
  15. hoppedupandcutdown
    Your status update says 280 main and 2700 elevation, need better specs. Either way you should bump up about 6-8 sizes on the main when adding pipes.
  16. hoppedupandcutdown
    All year banshee's use the same rear rotor, you'll have to look close to figure out whats been changed.
  17. hoppedupandcutdown
    ^^Oh yeah, that would be awesome
  18. hoppedupandcutdown
    I let my son pick his own color, he went with charcoal. Different,I think it looks good.
  19. hoppedupandcutdown
    yep
  20. hoppedupandcutdown
    Yes, I've read to the left of the case arrow, no more than 1/8" max. Did you completely tighten all 6 pressure plate bolts?
  21. hoppedupandcutdown
    push inboard with your finger while adjusting the screw. I've read on here that some people will adjust it a little out board of the case arrow (I think that 's the direction I read I'll try to find that info if no-one chimes in)
  22. hoppedupandcutdown
    Did you try adjusting the arrows on the case/actuator with the cable completely loose yet? Did you use ATV trans 80/90 or parts store gear lube?
  23. hoppedupandcutdown
    Is it low on fuel?
  24. hoppedupandcutdown
    If he ditched the stock box for pods, make sure you have bigger main jets. You could be starving for fuel on the top end for sure,or melt it down.
  25. hoppedupandcutdown
    the cap has two seals, one above the hose and one below, Yes get a new cap.

BHQ Quick Links

×
×
  • Create New...