Jump to content

hoppedupandcutdown

HQ Premium Member
 View Profile  See their activity

  • Posts

    3,462

  • Joined

  • Last visited

  • Days Won

    73

 Content Type 

Everything posted by hoppedupandcutdown

  1. hoppedupandcutdown
    I gots mad skills
  2. hoppedupandcutdown
  3. hoppedupandcutdown
    They're the same, as long as you installed 2.
  4. hoppedupandcutdown
    maybe the thrust washer that is like 1/8" thick?
  5. hoppedupandcutdown
    Where could I send a factory 2008 YFZ450 shock to be rebuilt? He wrecked it but seemed fine for a few rides, then last trip to the dunes it puked all it's oil.
  6. hoppedupandcutdown
    Ahh, we'll need to see pics of your nuts...
  7. hoppedupandcutdown
    did you try and turn the idle up on the right carb?
  8. hoppedupandcutdown
    Now I need one front shock for the 2008, ANYONE?
  9. hoppedupandcutdown
    Absolutely not.
  10. hoppedupandcutdown
    You must have misinterpreted this part of the shipping details... FREE SHIPPING ANYWHERE IN THE LOWER CONTIGUOUS 48 STATES. HAWAII AND ALASKA ARE EXCLUDED FROM THIS OFFER.
  11. hoppedupandcutdown
    The wire harness on the right side of the air box will sometimes melt from the exhaust. Also in that general area is a junction of a bunch of grounds that will corrode in the tape and cause all kinds of intermittent problems.
  12. hoppedupandcutdown
    I had one not start every time I washed it, only needed to unplug and dry out the CDI connections. (finally got around to putting in some dielectric grease)
  13. hoppedupandcutdown
    More specs for you all, my new 21x12x8 padlabrat 9 paddle play cut on 8x10 blue labels still only weigh 13.65lbs.
  14. hoppedupandcutdown
    See, you wouldn't have that problem if you also ran the 3" spacer like Skeeter said...pure genius I tell ya.
  15. hoppedupandcutdown
    Any auto parts store. little tube of gritty paste, smear it on twist flywheel by hand back and forth round and round, remove, clean well. Bam Nice new mating surface.
  16. hoppedupandcutdown
    yes, lapping compound - use it.
  17. hoppedupandcutdown
    I've seen more the stop on the frame bent/worn. A spot of weld on each side and dress it down til it stops before the wheels cam over.
  18. hoppedupandcutdown
    My 07 and 08 yfz450's did. Same OEM part number as A-arm banshee
  19. hoppedupandcutdown
    Did you not get the pro-flow and K&N together in a kit?
  20. hoppedupandcutdown
    32mm nut, but my 1 1/4" fits better. Phillips screw problem is very common. i like to replace with original - just me
  21. hoppedupandcutdown
    If it looks like this you are good to go. I've got one so old it's shrank and can barely get it on and off. A little silicone with the o-ring is a good idea too.
  22. hoppedupandcutdown
    I was thinking about getting some of those, you didn't like them? Were they light?
  23. hoppedupandcutdown
    "Idiot holes" I like that. I suppose if you barrel over a dune and end up in the drink you'd be considered an idiot, but on a 110*plus day they ain't a bad idea...
  24. hoppedupandcutdown
    Little Sahara Oklahoma, only water crossings will be in the camp ground after a rain.
  25. hoppedupandcutdown
    I've ran a LED taillight off AC forever, no brake light though.

BHQ Quick Links

×
×
  • Create New...