Jump to content

hoppedupandcutdown

HQ Premium Member
 View Profile  See their activity

  • Posts

    3,462

  • Joined

  • Last visited

  • Days Won

    73

 Content Type 

Everything posted by hoppedupandcutdown

  1. hoppedupandcutdown
    21mm from the carb body WITHOUT a gasket to the top of the float. Just when it barely touches the valve. http://www.dfn.com/agservices/jetfaq.html
  2. hoppedupandcutdown
    LSPS Sand City Site #119 again, same as just last weekend. Can't wait!
  3. hoppedupandcutdown
    & a flywheel puller.
  4. hoppedupandcutdown
    Any luck figuring that out yet?
  5. hoppedupandcutdown
    Did you put the outer pressure plate on in the right spot? Engaging the splines?
  6. hoppedupandcutdown
    ^^^ my thoughts, too.^^^
  7. hoppedupandcutdown
    1.0
  8. hoppedupandcutdown
    When is everyone arriving?
  9. hoppedupandcutdown
    this cut-out, you can just pull the filter and see
  10. hoppedupandcutdown
    I've already started loading the trailer. Can't wait !
  11. hoppedupandcutdown
    Hey, man...you can keep your WEED in there !
  12. hoppedupandcutdown
    fixed. FFS Burke proof read your shit, I know what you're trying to say and I can't even tell what you're trying to say.
  13. hoppedupandcutdown
    You will need a new (good used OEM) stator. Start a wanted thread... take a pic of the plug Most Banshee's don't roll easily in gear cold with just the clutch pulled in, not that something could not be messed up.
  14. hoppedupandcutdown
  15. hoppedupandcutdown
    I can never tell when you're being sarcastic. Or if you actually have that good of taste.
  16. hoppedupandcutdown
    Aren't you the guy with the East Coast ATV motor full of shrapnel? I think there's a WHOLE lot more to this story.
  17. hoppedupandcutdown
    I'd almost think somebody helped you out and put them in there for you. Does your woman think you love your Banshee more than her?
  18. hoppedupandcutdown
    +2+1 Chrome everything... as near perfect as you'll find. $450 shippped in USA
  19. hoppedupandcutdown
    It does look great. Makes me want to polish up my purple/yellow one again.
  20. hoppedupandcutdown
    Looks like the detent ball from the kick start, no idea how it would end up inside the motor...
  21. hoppedupandcutdown
    I run a DID chain advertised with thicker side plates and I know other links won't fit it. Also ran in to that problem on my kids LT80. I always get a master for the specific chain now.
  22. hoppedupandcutdown
    one vent hose runs from under the rear motor mount, the other from the water pump cover, they Tee above the engine and then run up the steering stem and down a little to the atmosphere.
  23. hoppedupandcutdown
    that...what?
  24. hoppedupandcutdown
    The tee is for the case vents not coolant. Lower outlet on the overflow tank goes to the radiator neck Upper outlet hose goes up the steering stem and down to nowhere (atmosphere)
  25. hoppedupandcutdown
    The cores are long enough to fit inside the aluminum on each end unless they are rusted or have been beat on. Toomey sells new replacements.

BHQ Quick Links

×
×
  • Create New...