Jump to content

hoppedupandcutdown

HQ Premium Member
 View Profile  See their activity

  • Posts

    3,462

  • Joined

  • Last visited

  • Days Won

    73

 Content Type 

Everything posted by hoppedupandcutdown

  1. hoppedupandcutdown
    You can measure the stroke through the spark plug hole with like a pencil, and you can look at the pistons by just pulling the pipes, if you feel the need to.
  2. hoppedupandcutdown
    No, and just to be clear - he said air screws, not idle screws.
  3. hoppedupandcutdown
    ^^ that was sarcastic, the diesel is actually a legit old school remedy
  4. hoppedupandcutdown
    or just skip straight to adding banana peels and sawdust to mask the whining.
  5. hoppedupandcutdown
    I've got a new maier carbon fiber look one that I'd sell cheap, it's kinda black AND silver. lol
  6. hoppedupandcutdown
    Spend an eternity painting trying to avoid fish eyes, and there you have a can with them built in.
  7. hoppedupandcutdown
    So who all is staying up on the hill and where? I see that it's filling up.
  8. hoppedupandcutdown
    What was the elevation in Nevada where it came from?
  9. hoppedupandcutdown
    You need one of these http://bansheehq.com/forums/index.php?/topic/185373-fox-racing-grilles-for-stock-plastics-wdefects/and paint it yellow to match your frame!
  10. hoppedupandcutdown
    Krylon 1403 dull aluminum, probably have to order it from an auto parts store. I usually spray that over any cheap spray can acid etch primer. VERY good results.
  11. hoppedupandcutdown
    You just would have to have a loose connection somewhere. Either at a factory plug or something that's been previously cobbled.
  12. hoppedupandcutdown
    The pain, yes it all eventually goes away.
  13. hoppedupandcutdown
    I don't know what you're doing there, it should actually hurt. Pull a spark plug, stick it in the boot, hold it's metal part on the engine's metal, kick, look for a bright blue spark. Helps to be in a room with little light.
  14. hoppedupandcutdown
    All the ground wires gang together there in the middle of the harness.
  15. hoppedupandcutdown
    HaHa, beat you to it, already provided a link to it yesterday! Lmao
  16. hoppedupandcutdown
    monies sent!
  17. hoppedupandcutdown
    A card in there loosely, will be fine. But not to loose. Not tight either.
  18. hoppedupandcutdown
    I just measured 5 different business cards from my desk drawer... .011" to .014"
  19. hoppedupandcutdown
    Pickup coil gap: 0.015"-0.020" http://bansheehq.com/forums/index.php?/topic/133650-banshee-electrical-faq/
  20. hoppedupandcutdown
    For the THUMB switch, just unplug it all to test
  21. hoppedupandcutdown
    double check that's a good connection
  22. hoppedupandcutdown
    It only took 15 posts to drag that bit of info out of you. They all came with keys. Look around the radiator for a harness with a jumped wire, will be heavy gauge black to red /black stripe. That will be the key switch that was by-passed ---good place to look first For the THUMB switch, just unplug it all to test
  23. hoppedupandcutdown
    OK - what switch?
  24. hoppedupandcutdown
    could be a dirty/bad contact in the thumb or key switch too
  25. hoppedupandcutdown
    remove plug boots and trim the wires back about 1/4" might even just get new boots. check for a burned wire between the right exhaust and the airbox.

BHQ Quick Links

×
×
  • Create New...