turbowrenchhead

I ran a CFM box on my blaster and it works great. I just ordered and recieved my cfm for banshee just a few days ago and the quality looks just as good. I'm sure it will work great for my quad. I will be installing it once I get my bike jetted correctly.

I'm going to run another leak down test when I get my fmf Q series muffs.

Stock 87, stock crank, 65mm bore. I used a 35 pwk with the single set up

I'm running two small uni filters direct on the carbs for now so I can pull them easily to jet. After its jetted then I have a cfm box with two larger uni's that will be installed.

I didn't know there was suppose to be one there. There wasn't one when I bought the bike. I have not been around banshee's and this was a learning process. I still figured it out. Yes I did a leak down. Its sealed up nice and tight. I did make my ports and boost ports huge.

I'm still happy with the dual carbs versus the single. I'm still in process of jetting the stock dual's. I have 30 pilots in it. I'm back up to 390 mains and its still a tad lean. I had to order 400~420 mains. It ran like crap before because I didn't have the the choke connecting hose installed. It's running really good now. Starts easy and doesn't hesitate or bog when you hit the throttle.

I tried pm,ing. No response yet. I tried calling, it was a fax machine.

I tried to order mine. The coupon code didn't work and said it was invalid. Anyone else have this problem?

Had another chance and nice weather to perform yet another plug chop. I had 380's on the run. Still have some grey on the plug. I have to order larger mains now.

Do you know what the springs were rated at?

I'll be 41 this July and I have two boys that are 4 and 8 so I'm good on shooting blanks from now on.

Thanks. I need it. Feels like I've been punched in the gut several times. I had a hernia repair and a vasectomy at once.

Do they come in different stiffness's? I want the spring to match the +3+1 arms.

I read the entire thread. I'm recovering from surgery so I had the time for once.

Why, Like I really give a shit if ppl have nothing else better to do then to point fingers and call names.

Wow, what a thread. Some ppl just have too much time on there hands. I installed a Diamond J +6 on my blaster and it has taken a beating without any problems what so ever.

I have +3+1 full flights in front with a pair of nice yfz's. The stance is too low when the preload is at minimum. GT Thunder said that they have a dual rate kit for yfz's. Has anyone tried these out?

The klim's look like a nice product

Who would pay $650 for pants?? http://www.rockymountainatvmc.com/p/43/-/439/741/-/31024/Klim-Badlands-Pro-Pant

Now to find some comfortable riding pants for underneath

I think I found what I'm looking for. Here is a nice deal on a motorcycle full rain suit. Great price and great reviews. http://www.jafrum.com/Motorcycle-Rain-Gear/Mens-Rain-Gear/RS5003

It seems that there are no true 100% waterproff zip offs.

I think this would be a good pack along rain suit for nasty conditions. The price is resonable. http://www.amazon.com/Nelson-Rigg-Stormrider-Black-Visibility-Yellow/product-reviews/B0068ERNNE/ref=cm_cr_dp_see_all_btm?ie=UTF8&showViewpoints=1&sortBy=bySubmissionDateDescending

Completely waterproof but it looks bulky and to warm for summer riding. http://www.amazon.com/Milwaukee-Motorcycle-Clothing-Company-Riding/dp/B000YB2LSO/ref=sr_1_2?ie=UTF8&qid=1366566737&sr=8-2&keywords=motorcycle+rain+suit

The Klim pant website doesn't say anything about being water proof