04_blu_shee

Not stepping on toes but my 06 Rappy book says YFM700RV they come OEM forged piston. What does the M mean...Banshee ofcourse is YFZ350 it wrote the book.

What kind of power does shee make H.P. TQ. ?

Not if you replaced with STD. stroke crank and 513 weisco pistons

Sad to hear of your delima but im with sheerider11...it might be a spendy repair

Castor 927 after 4 yrs of pounding it up and down the sand still has 180 psi comp. good oil imo

Rocky havent seen you on any of the forums lately how is Oky...I miss L.S. Wow 160+ what the hell are you building

MY AXLE WAS OFF A 98 bLASTER AND AS FAR AS CARRIER MAKE SURE AND MIC THE i.d. OF YOUR BEARINGS COMPAIRED TO THE AXLE. bANSHEE CARRIER o.d. IS BIGGER THAN ON bLASTER BUT i.d. IS THE SAME ON THE BEARINGS ON THE oem CARRIER...hOPE THAT CLEARS YOUR QUESTION

Paddles mounted

Banshee axle on top Blaster on bottom

My computer is stupid... anyway I'll post pics of my set up a little later tonight

You can use any year Blaster axle the splines are all the same just need to use the brake rotor hub from the blaster ...it all works great. I'll post pics of my se in a bitt up

I done it on my bike works great...makes for a narrower tire spacing when useing 5-3 Douglas wheels

No top end power from a single...Banshees love to eat, give it seperat feeders and let er rip

Like troyzstang said...ported motors are a whole lot more

Just to throw out combos...Im 210lbs. my bike is bout 72ish hp I run 15 40 gear my tire is 22x11x8 10 paddle extreme SLS 72 RO tranny is 1-5 dunable having said that I never bog off the line and run through 300 ft mark in 5th gear at a decent RPM...With your HP run a 22 inch tire and I would also say a Extreme paddle

Who ported these stockers?

Who done the power jets on the 38's

Im running 33 PWK on my dune ported bike that Brent Schimmer Dirt Works from Grand Island Ne. he said with the port work I could run ## or 35 PWK and he also said if I was going bigger with my build to go and buy the 35 s. Hell I understand that a 38 or bigger would be way too big but with a ported bike those carbs b . eing jetted right which is very easy will pull and run strong

My build is bout same as yours I run 33 PWK bottom end is still decent. Id say go with 35 PWK for future bigger build...I wish I would have done this.

The weather is COLD... put a blanket on the 2 stroke for the winter and forget about it.. they dont like the cold winter weather My.02

Somebody is going to get a nice bike...Good luck on the sale

Buy the PWK if you can tune a stock 26 on a Banshee you can tune these In my opinion hell I can tune mine and I run pretty strong for my build.

i

Waaaaay RICH definitely

308-233-1326