special06shee

If your looking for a decent all around tire.. Look at the itp mudlites. They are pretty light,6ply, and ya can get the in 22's. not sure if they come in a 10" rim tho.. But they are very nice with decent all around traction! And yes, you might have to re gear the quad, they are a tall tire!

I have this exact set up! I ran those shocks on +2+1 arms all summer, just installed those +3+1 asr arms but didnt try them out yet. As far as the shocks go, i like them! But all i do is hill climb. The asr arms are a nice arm, and the hiems are very impressive compared to MOST others!

Ahh.. Is that the blue and red stuff your referring to?? Maybe not.. Nope never heard of it!

So youd rather chance a screw going thro your motor??

Wow! That was mean!!

Yup!! Looks great man!! I like it alot!!

Well its a nice bike! I just think the diamond plated gas tank wrecks the entire look!

If i lived closer to the sand id be all over this thing!! Fucking sweet!!

Well im going against the grain here.. I think its ugly

I like to hear the bike with a load behind it! It sounds completely different then the other 2-1 pipes i've heard

200hp

Stock gearing is 14-41! Thats all i run. As far as top speed question on a stock shee goes.. Well youll here all different stories! My bone stocker according to my garmin gps topped out at 76mph.

Stock gearing should be fine!! Not sure what you have done too your banshee but if its stock your gonna have your hands full with a 700 raptor, regardless of gearing! Also by going too a taller gear you have to make sure you have the power to truly pull it! If not the top speed will go backwards!

94banshee??

copper rtv looks like dog shit!! get yourself new orings!! i normally use fartory orings, they are a little big so you have to sand them down so the properly fit inside the pipes!

Yes.. The only "special" tool needed is a flywheel puller

I can tell right away if a clutch it slipping or not... The easiest way is to take it out on the road and roll in the throttle in the higher gears, 4th-5th.. This will put the most load on the clutch.. You should have no issue in deciding if the clutch is holding or not!! As far as the 6 bolts that hold the pressure plate on, yes they will bottom out! No need to go crazy tight with them!

A kid we ride with runs them on a 421 serval.. He does not like them at all!

Thats more or less what i thought.. It does look awesome!

Question.. What is the main reason behind the new sub frame? I mean it looks WAY better and im sure it cuts down on a little weight, but is the main reason behind it? Just curious

I like it!! Looks good!!

Josh.. Just get the small bores! That is what Cameron told me to run with those cylinders!! It was a screamer!

Sweet cars!!

Sweet cars man!!

nice work!! i love the sub frame!! its gonna be ass when its finished!!