03DMshee

2 more... 6PSI 6minutes

The pins are usually the culprit.... So will a 450 front caliper work to or is that pushing it?

Im having similar issues! Hahahahaha

Just 1 more way the government can keep an eye on ya....

Pics of your swinger? Im sure you have 10 pms...hahaha

Oh boy...

And check your pivot bearings on swingarm and carrier area for your clunk...

Also check for air leaks...if your rpms stay up you might have a lean condition...do you know what jetting is in there now? When did this start happening? Anything you changed? Or did it start out of no where?

Gay!

Yeah holy shit...dont talk about a fix and give the repair!

Nice work! Now get the torch back out and tweak the left silencer strait!

Pins dont seem to need as much servicing in the front as they do in the rear also

I guess I should elaborate. ..mostly bolts with odd thread sizes or sizes that dont come in your standard 300 piece tap and die set...

Red and black or yellow and black?

I grind notches in all kinds of bolts to make chasers! Have a drawer full at work

Never hears of this! Cool shit!

Dont need tissues but my kid could use some diapers! PM sent! Haha

Thanks for the seat covers jeff! Also needed another myself! Hope all turns out well and your in for I if ya ever decide to start up again!

Not gonna get ya far talking like that.... And it says right in list swap out for known good parts...

Does it still have the parking brake? And or the wire still in the harness for it? Check for a green with yellow striker wire at the CDI and remove that from the CDI plug...then give it a whirl

I have the alba arms also... Arms hold up awesome especially riding in coal country.. Got the arms and had honda ball joints...they overnighted the correct joints over night with a return shipping label to boot.... Do not try to run factory lenth shock with there "adaptors" because the adaptors are not the same side to side...I guess it doesnt hurt to run them but why not have it right?...I called them and they said to send pictures so I did...they fabbed another set and shipped them out...same exact thing... If you look at the picture of there own banshee with the standard shocks its plain as day differant... So I ended up buying longer shock to use the long travel portion of the arm...its an improvement for sure just wasnt ready to buy shocks at that time... The a arm bushings are the only thing I would say are junk...im on my second set now and I have to buy another... BUT....there customer service has been great as far as the warranty like I said in another post just kind of a pain in the ass thats all...

What I was getting at is as soon as that list of things to check out and test comes up no one ever says what the results were...if you follow that check list word for word...you are gonna have a running bike at somepoint throughout it...

Aw fuck......

Check out site sponsors for your good parts...and do a google search of a part you wanna buy followed by banshee HQ there is usually reviews on most parts.... I havnt had much luck with the alba bushings. ..I know they had a bad run of them but the second set (free under warranty) that I got did not hold up that well either..but they have been great customer service wise just kinda a pain in the ass....

And if you use MEK...for christ sake put a fucking mask on...that shit is lethal!