willaduncan

Sent from my iPhone using Tapatalk

Stock linkage good shape with bushings seals and dust caps 25 shipped Rear caliper cleaned up everything is in good shape needs a rebuild kit and the bracket bolt head looks stripped but still turns with the correct Allen wrench and bleeding nipple is beat up 40 shipped Round house caliper plate not sure what it's worth make an offer Sent from my iPhone using Tapatalk

Wait are they painted? Sent from my iPhone using Tapatalk

Probably gonna be hard to sell with that 509 crap on the front, they look pretty clean though if you were to take those stickers off they should sell Sent from my iPhone using Tapatalk

The anticipation was killing me so I drilled and tapped the hole, it wasn't exactly perfect so I globed the hole with red lock tight and screwed it in as tight as possible by hand I didn't want to risk stripping it with torquing it down too tight I think it will be perfect once the lock tight dries!!! Sent from my iPhone using Tapatalk

I should have it drilled and re-tapped tomorrow and sealed the case halves!!! Sent from my iPhone using Tapatalk

Well if anyone needs the size of the deflector shield screws they measure M5x.08x10 Sent from my iPhone using Tapatalk

Nah it wasn't that bad they gave us new batteries and 2 more impacts and gave us the money back from purchase just becareful Sent from my iPhone using Tapatalk

They were the smaller batteries though so hopefully you will be fine Sent from my iPhone using Tapatalk

Be careful with that brand they perform great but we had 2 of the batteries explode on us at a race 2 years ago bad enough my dad got some decent burns and plastic shards the second battery wasn't as bad but it still blew up too Sent from my iPhone using Tapatalk

Hahaha called that shit Sent from my iPhone using Tapatalk

Does anyone have a way to measure the deflector screws ?? Wanting to make sure I buy the right drill and tap. I'm thinking M4x.7 and a 3.3 mm drill Sent from my iPhone using Tapatalk

Really? Sent from my iPhone using Tapatalk

The easy out was all left handed Sent from my iPhone using Tapatalk

And I've gotta pick up some actual paddle tires the ones on are for the ole ladies 4 poke Sent from my iPhone using Tapatalk

Thanks man I'm excited and can finally see the light at the end of the tunnel. TM Designworks still hasn't shipped my chromoly a-arm sleeves so I can mount up my damn a-arms I'm kinda disappointed in there slow shipping and lack of response Sent from my iPhone using Tapatalk

What size boot fits on the BR8ES plug I've searched and searched with no luck Sent from my iPhone using Tapatalk

Did redline ever provide feedback? Sent from my iPhone using Tapatalk

Blind hole Sent from my iPhone using Tapatalk

No putting it in it snapped I ordered a tap so hopefully I can just drill it and tap the threads, the easy out hand a "drill bit" on one end and I punched it before I did it so I've already drilled most of the screw out just need to finish drilling it with an actual drill and then tap it. I think I'll be fine, that screw is M4x.7 thread correct? Sent from my iPhone using Tapatalk

Got the rear end pretty much done!!!! FML deflector screw snapped off I hope I can save it... Any advice? I tried using an easy out didn't work drill and tap is the only way I can see saving it... Sent from my iPhone using Tapatalk

No need for a thanks, but I do appreciate it Sent from my iPhone using Tapatalk

I have a stem maybe some other stuff I'll look pm me on the stem and I'll get back to you on the rest you need - M2M's stuff Sent from my iPhone using Tapatalk

Nothing worse than getting you're first banshee in this shape if you're not careful you will get irritated and give up Sent from my iPhone using Tapatalk

Bump for a good seller Sent from my iPhone using Tapatalk