96n97banshee

yea all brand new got the whole rebuild kit

okay so first i thought it was the needle seat was bad they looked fine but i got 2x k&l rebuild kits that didnt stop the problem i doubled check the float height exactly 21mm i even replaced the reeds what the hell else could it be ? im running fmf pipes vforce 3 reeds carbon fiber boost bottle k &n filter it has 290 main 27.5 pilots needle in the middle position forgot to add it doesnt leak when its sitting their off or at idle i never actually c it leak but i but ziplock bags around the overflow tubes and ziped tied them on and in the bags after the ride their had prolly a quater cup of gas both of them combined

im gonna try a 300 ill post it up when i get the new jetts only got up too 290 figuring that would b plenty

these were just wot plug chops did 2 runs on both first thew sixth

i was thinking of trying a 300 just to c what color i would get .... and on the top end i feel like i could build a lil more rpms and im rilly surprised its taking a main this big cause it only has sst fmf pipes and a k&n filter and they recommend a 260

should i go too a 300 or is the 290 good?

engine is .20 fmf pipes vforce 3 reeds with trinity 2 into 1 carb i belive its a 35mm something like that im going to run a uni pod filter on the back of it im running in 80 degree weather at about 600-1200 elevation where should i start my jetting dont kno what sizes comes in them

okay so i have heard that the trinity 2 into 1 isnt the best setup but i got for free now my question is trinity 35 mm 2into 1 with vforce 3 reeds vs stock carbs w/ stock reeds goo if you have a reason like they suck plz tell why

100 bucks for the flywheel and stator and what type a-arms does it have ?

replaced the vacuum lines on the carb's yesterday and when i did i made them long enuff so they would tuck down right b4 swingarm.... originally they were like 3 inches long they r like 7 inches now ...anyways reason i am asking is jetting seems to b a little off now idk if longer vacuum lines will effect jetting ... if so how long r they suppose to be ?

im looking to spend about 200-250 for a nice set of lonestar +2+1 a-arms lemme kno