SKEETER
-
Posts
2,652 -
Joined
-
Last visited
-
Days Won
121
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by SKEETER
-
Subframe looks tweaked in couple Pics , might just be pic angle. But I'd find reference points on that and measure forward, and down , just to check.
-
Cams dyno is legit. None of that east coast 125hp 350 on av gas shiz 😂
-
Have you tried running a string line from a-arm mounts back to axle ? Pretty straight forward, pick the same spots on both sides and see what ya come up with. Easier when a-arms are on.
-
Stator issues definately worse under a load. Replace with good OEM stator, and see how it is.
-
Have you tested it with meter?
-
Cam could explain your options , diff hp #s, in about 3 mins on the phone. Hes pretty busy , but would be worth waiting to see what hed recommend. 10mm super wampus would be cool. Either way, after 1 pass, everyone gonna know what's up anyhow.
-
Are you planning on going back to k&t , or considering all options? Reason I ask, is cam has the pump gas motor setups putting out killer #s. Might be worth chatting with him on what would make best usable power with what your doing. K&t knows there shit as well, just havent seen much on pump gas stuff.
-
No, you're spot on dennis. Dont mind the douche
-
👍
-
No worries. Hopefully you can get a cover sent to ya. If you dont want to deal with it , just find a hotrod upholstery shop , and usually theyll install for 20 bucks. Having a steam gun, pneumatic staple gun and the knowledge will make it look better and last longer 👍
-
Bansheehp is actually the real life version of them boys in da woods. He'll make you squeal like a piggy
-
Be careful with bill, he may want pics of you instead......ever see the movie deliverance?
-
On the Cubs it was about 300$ to get replated. From millennium. Might of gone up . I'd send bill pics and see what hed recommend. Jmo
-
Those pipes arent the issue...
-
If it's a nikisil cyl , millineum does plating, and can repair. Might send bansheehp on here message hes driveline. See his thoughts, and if there worth fixing
-
Why not drop it off then?
-
Jfc. Goodluck
-
Get more credit cards. It's the american way !
-
Those vitos pipes are actually pretty decent, who's the guy doing the porting / engine work?
-
Lifes short, have a prosthetic made, charge to credit card.
-
Already told you, more than once. Cascade will send you a cover. Wtf else you want?
-
^^
-
Ricky Stator regulator with stock stator LED Question
SKEETER replied to Magnumpimplimp's topic in Banshee Repairs and Mods
My advice, ditch anything ricky stator. Junk imo -
Bolt a cyl back on and itll be easy to determine the stroke size , if you got a micrometer. Just measure along inside cyl wall, bottom dead center, rotate crank to top dead center, should read 54mm of travel for stock , 58mm for 4mm , etc.
-
Theres some nasty 7mm dm's...
