Jump to content

Surfrjag

HQ Premium Member
 View Profile  See their activity

  • Posts

    2,357

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by Surfrjag

  1. Surfrjag
    Im going to assume you have new plugs, cut back wires to caps, the slides are in properly along with proper pickup gap and clean and properly jetted carbs... Since it sounds like you have tried a few things I would go ahead and do a leakdown test. If your new stator and flywheel are afyermarket peices its likely they are junk. Stick to oem stuff
  2. Surfrjag
    Your comparing pipes on 2 different motors.. There are a few dyno comparisons on your setup In the dyno room. Have you checked them out? The cc difference and port layout would likely make the cpi feel entirely different than that of your friends stock cyl.
  3. Surfrjag
    Bye Felicia
  4. Surfrjag
    i have a whole bucket of headlight parts.. pm me what you need exactly
  5. Surfrjag
    Just one piston?
  6. Surfrjag
    looks like fun but your all over the place
  7. Surfrjag
    I got some painted pcs with fmf silencers
  8. Surfrjag
    Yes
  9. Surfrjag
    But ring gaps were good... lol
  10. Surfrjag
    Why cant everyone use a tz on pto side?
  11. Surfrjag
    I just ordered a set and they didn't come with grooves. they must be cheaper...
  12. Surfrjag
    how about give us more info... is this your first time?
  13. Surfrjag
    well... yeah
  14. Surfrjag
    if you have something that's in good shape to run, let me know. thanks!
  15. Surfrjag
    cylinders sold spark plugs pending
  16. Surfrjag
    coil pic bump
  17. Surfrjag
    Right under the clip. Order an EEK needle
  18. Surfrjag
    Did you take the needle out of the slide?
  19. Surfrjag
    Measure ring gap. It can tell you quick if its not right
  20. Surfrjag
    No problem.. How are you running 64mm pistons thats pretty rare
  21. Surfrjag
    Put that needle on richest setting and try it.. then get an eek needle like Dixie recomended
  22. Surfrjag
    How the hell did u do that? You need to split the cases and replace all seals
  23. Surfrjag
    What was the main issue with these motors?
  24. Surfrjag
    Or set the clutch up better
  25. Surfrjag
    Coming together nicely!

BHQ Quick Links

×
×
  • Create New...