Jump to content

Surfrjag

HQ Premium Member
 View Profile  See their activity

  • Posts

    2,357

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by Surfrjag

  1. Surfrjag
    Yfz shocks ride like poopoo. If all your trying to do is lower it some blaster shocks are much cheaper and ride like poo as well. Rm stators crap out, you can google that one and see multiple testimonials to their junkness.
  2. Surfrjag
    Your buying a bunch of jets you may or may not even need. If it even has the ones you need at all...
  3. Surfrjag
    There is a dyno near chesapeake guy is cheap and will jet it right on.. only gwt the jets you need
  4. Surfrjag
    So if you need a 27.5 pilot and a 300 main.... then what Where are u from I go to busco all the time
  5. Surfrjag
    You need to trench them if you go with that crank...
  6. Surfrjag
    There is no best for everyone ratio to run. You need to test and see what works for you and your setup.
  7. Surfrjag
    Time for an upgrade Good seller here!!
  8. Surfrjag
    Better do a leakdown
  9. Surfrjag
    What kind of products
  10. Surfrjag
    Cpi
  11. Surfrjag
    30 pilot 340 main To start...
  12. Surfrjag
    Haha let me know I want flames shootn out too
  13. Surfrjag
    Yes or frayed tips of pedals. Could try swapping them
  14. Surfrjag
    Check your reeds, swap your pkug wires, new plugs. Report back
  15. Surfrjag
    Turbo chassis I bug him all the time and he still makes me quality parts.
  16. Surfrjag
    Lean... Air leak likely or improper jetting or clogged pilot jet
  17. Surfrjag
    Is it sucking bowls dry? Pingle valve or plugged vent cap?
  18. Surfrjag
    1 cc wont make a big enough power difference to risk separating that crank and detonating that topend. Get the port work done and true and weld that crank!
  19. Surfrjag
    And how much timing
  20. Surfrjag
    Right but if its .060" squish now then that might be your problem. Like if its set up for a .012 base and has a .020 instead. It wont have the torq to get out of the hole like your describing. You dont know till you check...
  21. Surfrjag
    http://www.acerracing.com/ball_bearings/3/16_Ceramic_Silicon_Nitride_Balls-1191-65.html http://m.ebay.com/itm/380211578612?_mwBanner=1
  22. Surfrjag
    152? Did you check squish? Whats wrong with more timing?
  23. Surfrjag
    You can find a ceramic ball. I think its 3/16
  24. Surfrjag
    Clutch is smaller with smaller rod and ball and they dont make one that im aware of
  25. Surfrjag
    Its like 30mm What have you got?

BHQ Quick Links

×
×
  • Create New...