Blazen582

looking for banshee JJ&A Whatcha got..?????????

Congrats PPS. I perfer a stock frame over a drag frame any day. And thiers is hands down the baddest stock frame banshee out there. And not just because it ran 50's!! It's just a baddazz bike!!

Good deal glad I could help.

Did not see you had this posted on here.. I have been pming you on PS.. check your messages

You looking for one that goes in a stock tank or drag tank? I have one with out the flat plate.

UPDATE..... K&T Billet foot pegs. Right one has rub marks from a lock up cover ( as shown in pics) . Comes with spacers and mounting bolts. 60 shipped. Billet rear strut. Adjustable around 11 inchs (see pic with tape measure) 45 shipped PICS http://s319.photobuc...ibrary/PARTS830 I need a set of Banshee intakes with no cross over tube or plate for 38/40 carbs.. Text is fastest contact (804) 426-1562

Pmed you on intakes

Where are you located? Maybe interested in frame if its straight and uncut

Pm returned. Intakes do not have cross over tube.

I sold the one that was with the stator. But I have another billet Trinity stage IV you can get 35 shipped?

Ignition stuff sold..

K&T Billet foot pegs. Right one has rub marks from a lock up cover ( as shown in pics) . Comes with spacers and mounting bolts. 60 shipped. Billet rear strut. Adjustable around 11 inchs (see pic with tape measure) 45 shipped Banshee stator, adjustable timing plate, coil, and CDI box. All square plug. This all came off of a running bike. Harness has started to be shortned and needs to be cleaned up or trashed (harness is sort of a mess) 100 shipped. <--- money back guarantee that the coil, CDI, and stator work. Billet intakes for banshee. Fits 34/36 carbs I will have pic of these later tonight. 60 shipped.. PICS http://s319.photobucket.com/user/blazen582/library/PARTS830 I need a set of Banshee intakes with no cross over tube or plate for 38/40 carbs.. Text is fastest contact (804) 426-1562

UPDATE 2 with pics. If its not listed its sold.. http://s319.photobuc...library/Cheetah K&T billet pegs spacers and bolts Right has mark from lock up clutch cover see pic. 65 shipped.. Trinity stage IV billit adjustable timing plate 30 shipped. Small flange out each side big bore shear chrome, one small ding on neck 400 shipped Three bar wheelie bar with adaptor for top bar to mount to stock frame, two lower bars mount to carrier bolts. Was set up for 8 over arm but top bar is slip.. 200 shipped 6 over swing round house Molly swing arm and Tyson wheelie bar ( no wheel) and strut 450 shipped Can call or text 804 426-1562

UPDATE WITH PICS. http://s319.photobucket.com/user/blazen582/library/Cheetah 4mil cheetha ported by Dan Hull. Here's what I have left. : Cylinders 73 bore, head, v-3 reeds with less than 20 passes, domes ( one has small pits), upp intakes and cases. Lower case half has been repaired (back corner on clutch side). Everything is in great shape, was complete running motor but the lower case half has been repaired. 850 shipped. Also have: N down 1-5 over ride cut by WCR 300 shipped 39 PWK's alky Carbs, cable, billet throttle, filters, and pump 320 shipped K&T billet pegs spacers and bolts Right has mark from lock up clutch cover see pic. 65 shipped.. Trinity stage IV billit adjustable timing plate 30 shipped. Brand new K&N filters and otter wears Bought for 38-40 carbs. 60 shipped Small flange out right side big bore chrome CPI's one repair on neck. 325 shipped Small flange out each side big bore shear chrome, one small ding on neck 400 shipped Three bar wheelie bar with adaptor for top bar to mount to stock frame, two lower bars mount to carrier bolts. Was set up for 8 over arm but top bar is slip.. 200 shipped 6 over swing round house Molly swing arm and Tyson wheelie bar ( no wheel) and strut 450 shipped Can call or text 804 426-1562

we need to make the SEARCH bar bigger on this site! Someone starts this post every week with the same question!

I was asked if trans was dunable... I called Greg at WCR and received info on trans by the numbers he stamps.. It is NOT dunable, and it was cut in 2009.. Guys I am open to offers and will split this stuff up anyway anyone wants..

Looking for direct drive lock up cover.. NOT a stock cover converted by direct drive.. I want the re inforced cover that they make.. I have lots of stuff to trade or I have cash

4mil cheetha ported by Dan Hull. Here's what I have left. : Cylinders 73 bore, head, v-3 reeds with less than 20 passes, domes ( one has small pits), upp intakes and cases. Lower case half has been repaired (back corner on clutch side). Everything is in great shape, was complete running motor but the lower case half has been repaired. 875 shipped. Also have: N down 1-5 over ride cut by WCR 300 shipped Billet clutch basket with stock gear and small kicker gear. Has little play. 80 shipped Small flange out right side big bore chrome CPI's one repair on neck. 350 shipped Small flange out each side big bore shear chrome, one small ding on neck 400 shipped Three bar wheelie bar with adaptor for top bar to mount to stock frame, two lower bars mount to carrier bolts. Was set up for 8 over arm but top bar is slip.. 250 shipped 6 over swing round house Molly swing arm and Tyson wheelie bar ( no wheel) and strut 450 shipped I have pics of all can text them. 804 426-1562

have alky if you change your mind.. carbs, cable, filter, pump and billet throttle 325 shipped

3 tenths? What ET range is her bike in? Sounds as if there may have been an issue with the stock reeds you took out? lol

All has been sold

Carbs 60 shipped Intakes 40.00 shipped.

No one wants a set of carbs for 70.00 shipped or like new UPP intakes for 45 shipped??!!!! Carbs need new dumps (someone drilled these WAY big) 14.00 each on eBay.. And if you are going to run power jets.. 25.00 each? I have a cable I will send for free works fine but chip in plastic peice where one goes into two.. So that's 150.00 you will have in a set of Alky TM 36's?!!

I would be interesed in some serious updates.. We bought a set ran it for maybe 10 passes and the pedals have alot of gap (as in seeing daylight through them) anyone else notice this? Wish I would have taken pic before flipping pedals over. I dont mean just a little on the tips. I could almost watch a movie by looking through them..? New motor so I cant compare to any others..

Deleted all my messages so PM should work fine now.