252wheelieking

Welcome to the site. Just to let you know, once you start buying for this new addiction it will always be more room for more mods.

You must of miss this rule. 3. Prices are mandatory! This is not eBay or an auction. Failure to post a price will result in deletion of your post. X2 this means you should lower your prices.... JMHO

X2 on this......All I have to do is buy a 2006-2012 chassis & my old 96 shee will be a 2006-2012. Way cheaper to up grade the year There no difference in them other than VIN, engine #'s, brake light switch & tail light.

whats the difference in a new crank & a rebuilt one if all parts are new on rebuilt crank? Or your saying it better far as cost issue?

How many hours on hot rods stock stroke crank? Have it been true & weld?

How many hours on the crank? Has it been trued & weld?

Has the crank been trued & weld?

PM Sent

What weight are the works shocks set-up for?

Make a date for busco.....its inexpensive, tons of trails, mx track & etc. You can basically do what you want there, except speed thru the 5mph zone.....

Not to be sounding cocky dude, but TIME IS MONEY! I have three children & believe me you will reget not parting it out. If it was my bike I would part it out, because like you said before you can't build a 421 serval for what you are selling the whole bike. Get that bread man cause your little one & the rest of your family could use that extra money. JMO

PM Sent on dual pingel

OK I got the tracking # through my email yesterday.

I heard alot of good things about this place.

If this is going to be a East Coast BHQ ride How do we suppose to have fun here. They don't won't any ATV's doing anything. Im down with the East Coast BHQ ride as long as it's at BUSCO BEACH or a place better than BUSCO BEACH. This place don't seems like it's the place for people to be driving 8+ hrs. to have the BHQ ride. To me it seems like this place is mostly for dirbikes....JMO Tell me what you guys think: http://www.ncmp.net/ncmambo/

I have not heard anything from this guy since payment was sent....what happen to you sending the +5 chrome swingarm w/ tracking # out to me the next day after payment was recieved?

Pm Sent for grill & vapor.

pm sent on shift pro kit

Great Guy to deal with & don't hesitate to deal with him......Thanks man

^^^^^X2 but if you plan on doing mods in the future, I YAY the coolhead...

DON'T DO IT......For $3000 you can buy both of us a 421 serval cub set-up. Seriously as stated above buy a cylmers manual $20-$30 depending where you get it from. Then take half of that $3000 & buy you a 421 serval cub set-up. If that's too fast for you send your cylinders to a site sponsor & have then bore/hone & port them for your type of riding. Then buy a new crank from them, once you get to reading the cylmers & following the direction step by step. You will be glad you own a banshee cause there the easiest motor to build. JMO...Then you also would be glad you didn't pay $3000 for something so easy.

I adjusted my screw with the engine in neutral also & currently having the same exact problem you are having now. I also miss 2nd gear alot when I rev my motor high & try to shift to 2nd fast. I did some research & found that I should adjust the screw with it in 1st-2nd or any gear except neutral. I have not had time to try it yet but I hope it work. I will let you know what the outcome on mines turn out to be.

PM & Payment sent