BANSHEE HP

you do NOT want to run a 795mo6600 the correct piston is 573mo6600

40 mm pwk alky pump carbs 125 dumps ddk needles 118 main jets 60 pilots 6.0 slides dave more powerjets i believe $250 shipped those are vitos power jets bump for some nice looking stuff

I've had two pairs of vito 10mm cylinders, one a little more ported then the othe. They made 94 and 98hp on pump gas, 40mm carbs and shearer bb inframe pipes. Also between those two sets and a stock stroke set I had, no stripped studs or helicoils

vitos 10mm cylinder are full drag ported out of the box...pro circuits are not the recommnended pipe

513? or 573mo6800

honestly, i see you posted more mis-info then about anyone on this site.

no, the port heights on a stock stroke cub to a 4mm will be raised too high.... now if you spent a bunch of $ to get the cylinder welded up, reported and plated, along with some custom domes, different pistons and base gaskets you could run it but that would be the ass backwards way of going at it.

Lake is a town or township in Clare county Michigan which has a 989 prefix. just checked the phone # comes back to Lake city michigan also has a nice grand prix fs aswell http://centralmich.craigslist.org/cto/3282655014.html

heres a fun and educational game to play, count the mispelled words. i found 14 my first time

2006 custom 421 stroker banshee biult by cascade inovations out of californya this thing rips built to do 500 feet in 4 sec, loves 110 octane got clocked at 93 just getting into 6th geer, dont rilly care to get rid of it just seing whats out there looking for a hot rods, rat rod, or something cool with a moter, cash is king look it up under ther web site moter alone is 8,000 i have alote of money in this. [show quality] no low ballers call eric 1-989-544-2454 or 1-989-400-1933 421cc stroker ct mild heads ported and polished jugs and clutch casing dirt digger clutch v force 3 reeds ngk super coils 36 mm stage 2 makuni carbs hot rod crank hypo pistons tummy t5 exaust skin graphics kit 4'' extended dura blue rearend itp beed locker rims with new itp holeshots lots and lots of crome http://saginaw.craigslist.org/bar/3281581853.html spelling asaid, this thing does over 90mph, has ct mild heads, 2 stage makuni carbs and dont forget the tummy exaust

id just stay clear of swimming in lakes then, water spiders, water snakes and who knows if they teamed up on you, youd prolly drown

16 staggerd terrain trak on a 10x12 wheel alitte less then 78ro

whoever told you this is stupid, if they are the ones selling you the cylinders id just pass on them. who knows what else "could" be wrong on them

terrain traks

Modquad is junk, I've destroyed a few of there hubs.

Mikuni tm38's bored to 40.5

wow, #1 come back in bhq history. you really showed him

squish test

350cc+20cc+.080= 450cc

who ported it and what brand pipes?

who or what is DSR? ive never heard of them

Who's gonna have a Marvin shaw fill tank?

sparkies are no longer being made. you could maybe find a used set

^true for the most part. vitos never made a 4mm 115 rod until the new polished rods were out. they did however make a 10mm with 115 rods that would say 30L on them. vitos webs were and still are all black.(ones in the pics dont look black) 29L was 110 rod and 30L is a 115 from vitos. now the newer polished rods do not say 29/30L they say 110 or 115. theres no way those welds were done by vitos either. i know there are other companys that bought forgeings from the same place as vitos but i dont know who they are. my guess is thats a crank from one of those ppl. has the p.c. lazered on them, same kind of rods, same style single groove labyrinth seal, but no black webs.

That is a Wang crank