Jump to content

BANSHEE HP

HQ Site Sponsor!
  • Posts

    1,807
  • Joined

  • Last visited

  • Days Won

    10

Everything posted by BANSHEE HP

  1. Holiday weekends are a blast! If you don't plan it right you'll be one of the ppl complaining about holiday weekends. If you need holiday weekend advise pm me. As for least busy April 1- before memorial day and after labor day weekend till Halloween. Summer time weekends can be hit or miss but not bad at all.
  2. Tungsten, ceramic, leaving balls out of some grooves. Endless possibilities
  3. Slingshot uses ball bearings for weight. H.O.D sells weights for arm style lock ups
  4. No, vitos used 29L for 110mm rods and 30L for 115mm rods. Now vitos use a polished rod with vitos laser etched into them as well as the rod length.
  5. I have some Honda hubs that fit a banshee axle splines. Not sure what they were off of but like john said I used to leave them bolted to the rims and just take the big axle nut off to use the hub & wheels
  6. K&T's triple is the fastest four wheeled atv in the world. 3.10 in 300ft
  7. if its a drag ported stock stroke, then its not likely that those cylinders will be able to be used with a 4mm stroke crank.
  8. ive been riding on a cylinder that had the cir-clip pop out and make two grooves on the cylinder wall, pretty deep. I bored to the next size(not because of that but because they needed to be). the two grooves look awful but they are below the exhaust port and doesn't affect compression or ring life. take a picture of the damage OP, maybe its way worse then what you describe, maybe its not that bad at all?
  9. Ill be at a annual bbq/pig roast on the opposite side of the state.
  10. pwm and pwk bowls are the same. white knuckle and a few others make bowls with the drain plug in the bottom
  11. ive got a 2 sets. they work great. nice being able to change the main jet and pilot through the drain plug.
  12. Some tire shops can't do a 10" rim. Ask around tho there are plenty that can.
  13. If they are drag ported cylinders for stock stroke, then the ports will most likely be raised too high to be used on a 4mm stroke.
  14. What chassis are these 18's on?
  15. Isn't a serval "dune" ported as cast?
  16. for what its worth. I had one of these cylinders back in the day. vitos 392 monoblcck unported, vito fat bastard pipes, 130spi, 34pj carbs, 0* timing made70hp. mat shearer had one that he ported for a 4mm making it a 421 that made 114hp.
  17. im not sure you know what your getting. a "12" port cylinder is a stock cylinder with triple exhaust ports and 2 extra holes jim makes in the sleeve. a stock cylinder has 8 ports. a cub cylinder has 11 ports stock.
  18. Matt Willis went 5.30 at 121mph just about a month ago. 20dm 710cc
×
×
  • Create New...