BANSHEE HP

Permatex 51813 anarobic sealer

that's it? bore, chamfer and hone youll never see it.

pictures.

let me tell N2o to fuck off for you... hey N2o don't you have some offs to fuck

Yes.

They are not made by the same company. Some of vitos pistons are made by wiseco but not the 68mm pistons. The 68mm pistons are fine. 3 different pin heights. If your running a 392 then a standard pin height piston is what you need. You could take windycityjohns advice and get the wiseco 9768mo6800 pistons($150each) made for trinity. He loves trinity so much.

Most of us switch to gas when ice racing

I agree with Tyrone^

FUCK! all of you.

I see the triples and its the domes accommodating the stroke not the cylinder

Michigan made at its best right there.

FYI stock cylinder height is 4.036/7"

A 4mm stroke pushes the piston up 2mm. The 795 series moves it down 5mm and the 573 series pistons move it down 6mm. So you would be 3 and 4 mm in the hole trying to use either stroker piston

Nothing on or around my house looked tampered with. Cop told me he was just over 18 and the dad was super pissed. Kids gotta pay the tow truck recovery which is probably a few hundred.

when and if he accepts my friend request on fb, ill direct him to this 8th rate site so he can see this.

8th or 9th rate shit website

Ok so I come home last night around 2am from a workout session of 12oz curls.( Now I don't live in the city, I live off a two track style driveway through woods about a 1/4 mile. Because of all the snow and ice bullshit this year I cant get within 200 yards of my house even with 4x4.) So I get out of the BHP customs motor werx truck and start walking to the house. Ive got a flash light because im scared of the dark and I start seeing tire tracks in the snow past where I stop and start to walk. Ok keep walking and turn to walk down my driveway to the house and see this truck stuck. I took some pictures and went to bed. Not calling the cops last night because maybe it was someone I knew (long-shot) but wait till this mourning. Weil while I was out taking pictures of the truck this mourning a dad, son and tow truck driver cam walking up. The kid tells me the his gps on his phone told him to come down my two-track, passed where u can clearly see where every turns around and damn near up to my house(pics to follow). His dad trys to give him a pull with a 1500 Silverado with street tires, it was a failed attempt. By now ive called the police and theyre arriving to my house. Tells them the need a really wrecker to get this out. Took a few trys but with a nylon cord winch, block and pulley system they got it unstuck. The kid is supposed to come back when the ground thaws and fix the driveway.

Im from Dunt, AU.

pictures?

I run a 55 pilot in my 4mm cub and 60 in my 10mm cub. 116 in the 4mm and 119 in the 10mm. Are/have you adjusted the slide adjustment screws? Air screws?

theres a few #23's on that page fyi

hot rods doesn't make a 10mm crank. now it may have been stroked and turned into a 10mm but it doesn't sound like it being that it has stock length 110mm rods.

hot rods 121 rod is a 110mm rod. 158 is a 115mm rod you sure its a 10mm storke? post some pictures

.120" deep and only as wide as the rod