Jump to content

BANSHEE HP

HQ Site Sponsor!
  • Posts

    1,807
  • Joined

  • Last visited

  • Days Won

    10

Everything posted by BANSHEE HP

  1. What's too big in terms of squish? .050? You went from a .015 base to a .020 right
  2. good luck out there. looks like a perfect weekend to be at Silver lake. wish I was there.
  3. from the pictures it looks unplated, plating should almost "shine" next to cast aluminum. a better pic of the bore would show it
  4. what stroke is the cylinder? 64? and what stroke was it ported for
  5. With a stock cylinder at 4.037, a .020-24 base gasket and standard pin height piston you should be .010 from the top of the bore at tdc.
  6. You won't see anything like that at LS, no one drives trucks in. Silver Lake ftw
  7. vitos doesn't make a 10mm stroke crank anymore
  8. I heard there's a blue 100hp 7mm stk cylinder and some other banshees there
  9. Two different pvls. One from 2009 and one from before then. Both ran off one kill switch.
  10. I've been running one kill switch on a pvl for years with no problems
  11. I've had the same ybn hold non oring chain on a 100-120hp bike for 3 seasons. And a oring ybn chain on my stock is bike for 1 season
  12. No problem, only place I know of in our area. I'm sure there's other places in the city but they're good guys at Brandons tire. On a side note Brett text me your number, new phone and I lost all the latest contacts off my last one
  13. Brandon tire in Ortonville can balance atv tires
  14. Mines this big and about that wide. She run hard.
×
×
  • Create New...