Jump to content

BANSHEE HP

HQ Site Sponsor!
 View Profile  See their activity

  • Posts

    1,807

  • Joined

  • Last visited

  • Days Won

    10

 Content Type 

Everything posted by BANSHEE HP

  1. BANSHEE HP
    man
  2. BANSHEE HP
    Bump
  3. BANSHEE HP
    Sounds like he needs some help with his addictions....
  4. BANSHEE HP
    I'd steer clear of this seller. Your looking at a listing for new cylinders ported but the pics are of used cylinders ported and a new niche cylinders in the other pics.
  5. BANSHEE HP
    keep that broken piece and have someone weld it back on there
  6. BANSHEE HP
    Sold.
  7. BANSHEE HP
    Hot Rods 4mm 115mm rod crank. Low hours, true welded, tight bearings. $300+ shipping for $40 more ill include 2 new wristpin bearings and crank seals.
  8. BANSHEE HP
    Vf2 > everything else
  9. BANSHEE HP
    The cases are sealed with a labyrinth seal between the center crank bearings.
  10. BANSHEE HP
    Clearly
  11. BANSHEE HP
    tell us all how those bearings dont hold up and blow apart.
  12. BANSHEE HP
    Mostly as cast but I see a few things he changed
  13. BANSHEE HP
    might want to re test the squish clearance too.
  14. BANSHEE HP
    ^ That's another dollar I'm owed
  15. BANSHEE HP
    nice looking stuff. whats the ticket on polishing a set of stockers?
  16. BANSHEE HP
    15 hunnit hd silveraydo
  17. BANSHEE HP
    400ish is a little more than I would charge but it's not far off. 100 to bore 200 for 66mm pistons 40 for gaskets 20 for wrist pin bearings
  18. BANSHEE HP
    Still looks rounded over and your vice grips are over the notch
  19. BANSHEE HP
    You didn't file it enough then. The notch needs a sharp edge all the way around
  20. BANSHEE HP
    So they need chamfering but are drop in ready with no machine work?
  21. BANSHEE HP
    You guys both owe me a dollar now.
  22. BANSHEE HP
    You can pull the spring to one side, hold it with the needle nose and then file. Whatever is easier
  23. BANSHEE HP
    There are 2 notches. When you fully extend the plunger you see them. Closer one to the knob is half choke, the further one is full choke
  24. BANSHEE HP
    Do not buy a new one... pull the plunger, hold it with needle nose pliers, take a small file and file the notch.
  25. BANSHEE HP
    Where do I sign up for the banshee nation?

BHQ Quick Links

×
×
  • Create New...