Jump to content

BANSHEE HP

HQ Site Sponsor!
  • Posts

    1,807
  • Joined

  • Last visited

  • Days Won

    10

Everything posted by BANSHEE HP

  1. We'll pay $10 each or $15 in Driveline parts credit.
  2. i know where you can put it too
  3. We're looking for as many stock heads as possible. They can be pitted in the chambers but not milled more than .020".
  4. better one... were they tightened in the first place?
  5. the old plugs may have been just to keep dirt and debris out of the motor during shipping
  6. a leak down test couldnt hurt either, but figuring out whats going on the in motor for squish and compression is sumthing that you need to know. especailly after melting spark plugs
  7. can you do and compression and squish check?
  8. too further my response, when we did install the motors, theres always a customer that complains when we add 3 gallons of antifreeze and 6 quarts of oil to there bill. like it should be included in the price of the motor alone.
  9. Yes. Was he charged for oil? The owner of the machine should be checking the fluids also. Im my personal experience I've built many atv and automotive engines and non of them get oil before leaving. Now I always tell the customer that no water or oil is in the engine
  10. no more dune ready vouchers. stickers consist on a $11 state park pass, $26.25 orv permit and $10 trail permit.
  11. Yes, 9°. What's compression are you looking for and what's the elevation?
  12. They're on the shelf at Driveline performance. $55, 20 or 21cc.
  13. theyre stock... but you measure the small end of the carb not the bell end for bore size.
  14. Stock carbs and your air screw are adjusted different
  15. Driveline Performance. $59.95 for 130 link o-ring chain, $49.95 for non o-ring drag chains. $17.95 for the rear sprocket and $12.95 for the front. 38-44t in the rear 13-19t on the fronts
×
×
  • Create New...