Boston
-
Posts
585 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Boston
-
kinda hard to tell from that pic. does the it neck down at all where the flange is welded or just the same diamater?
-
id say a +6 and some 10 paddle either hauler or extremes
-
so Im in the process of having a 7mil cub built and i want a drag/hillshooter bike with this.. so I will be running alcohol with it. What is the best carb to run alky thru and easy to tune? Ive read a bit on how to run it and i get that you have to purge it after your done riding. What are some other things that I need to know?
-
would be perfect! just get it jetted right
-
the reeds shouldnt mess with the jetting i believe it just improves throtle response.
-
port it.
-
need your altitude as well
-
get it ported first off for a trail port would be the best bang for your buck. from there its endless.
-
try pressing it out?
-
probably a million post on this one.. is that all you got is pipes?
-
gotta know alot more info.. need all your mods, type of fuel your running, compression, elevation, pretty much anything you know about whats done to the motor. put the bowls on the right carbs being that there stock?
-
some 34mm carbs would be a good choice but it all depends on what your going to do with the bike. all depends on what cc your domes are cut at. not sure on the rings but i would only run the rings that are made for the 795 pistons. To make a banshee reliable all you have to do is set your carbs up right and run good oils.
-
yes you did it correct. you dont mess with the air/fuel screw for setting your idle.
-
might be running out of fuel?
-
chrome ,billet,lonestar,slc,,,,etc. banshee parts
Boston replied to trademark's topic in For Sale - Parts & Accessories
whats the best you can do for the swinger and tank? pm me shipped to 705 east rosewood lane layton ut 84041 -
150 is the cheapest ive got but can go up to 500
-
sounds like you got a air leak. what condition are your intake boots?
-
-
can someone delete this one? i made a different one
-
I cant decide what color to pc my frame so I need your help. i will have alot of chrome on the bike such as a-arms, swingarm, shocks, pipes, wheels, axle, and alot on the motor. Then i want to paint my plastics a dark charcoal color with a crazy design with like black in the midle and whatever i pc my frame outlining the black. With a black velvet seat.
-
I cant decide what color to pc my frame so I need your help. i will have alot of chrome on the bike such as a-arms, swingarm, shocks, pipes, wheels, axle, and alot on the motor. Then i want to paint my plastics a dark charcoal color with a crazy design with like black in the midle and whatever i pc my frame outlining the black. With a velvet seat.
-
well give us more detail we need to know what your jetting is. what compression you at? timing? type of fuel?
-
is this a good trade for my banshee?
Boston replied to bansheedude55's topic in General Banshee Discussion
i wouldnt trade a shee for a 250 4 poke! if it was a 450 i would consider it. -
im sure you can find plenty of pictures of some done up like that.. i personally bought a frame candy green and im gonna do black plastics with black swinger and a arms.
-
oh damn! haha yeah i dont think it would matter how long it was just as long as theres a filter on the end.