n2otoofast4u

I didn't watch the video. Stock stator with "floated ground"...... are you 100% sure this was done correctly? Dyna coil....... are you 100% sure it's good? No tors? No e-brake shit? Crossover tube installed? Float bowls on correct side? Good ground? These things are very simple. I'd be amazed if one of the above isn't the culprit. Sent from my SAMSUNG-SM-G891A using Tapatalk

I'll be interested how long those internal thread isolators last. Sent from my SAMSUNG-SM-G891A using Tapatalk

Did you measure stroke? I could be a 58 stroke with a 110 rod. Sent from my SAMSUNG-SM-G891A using Tapatalk

That's a fucking sweet ride! Sent from my SAMSUNG-SM-G891A using Tapatalk

This is a fucking steal! This shouldn't last long! Sent from my SAMSUNG-SM-G891A using Tapatalk

TTT Because for the first time in months there's some quality conversation about what is right/wrong fair/unfair in regards to a bit of a roll. Sent from my SAMSUNG-SM-G891A using Tapatalk

Yes sir Sent from my SAMSUNG-SM-G891A using Tapatalk

You out of jail for good? I been missing you!

DB!

Do the Amish get mad for riding in their neighborhoods? Sent from my SAMSUNG-SM-G891A using Tapatalk

Junk Sent from my SAMSUNG-SM-G891A using Tapatalk

You didn't listen! Sent from my SAMSUNG-SM-G891A using Tapatalk

leave your stock intakes on and plug the holes with 3/8 IPS plugs, 2 hose clamps, and 1211... Crossover is not needed. mod your stock timing plate unless you are hell bent on different compression the stock head is fine. The "cool" part of cool head is virtually useless in a stock trim bike. Buy a puller Look on here for a COMPLETE used +4 arm. OK, sure, buy the reeds and pancake

Ebay Sent from my SAMSUNG-SM-G891A using Tapatalk

^ that the chick that DDQ smashed? Sent from my SAMSUNG-SM-G891A using Tapatalk

Pics of Annika! Sent from my SAMSUNG-SM-G891A using Tapatalk

No rain yet? Sent from my SAMSUNG-SM-G891A using Tapatalk

DDQ > REST OF BHQ Sent from my SAMSUNG-SM-G891A using Tapatalk

Your FA ain't never been off no damn ramp!

^^ How did that end?

Tyler should be all over dem wheels fam! Sent from my SAMSUNG-SM-G891A using Tapatalk

THIS WILL STIR THE SHIT.... DAVE5.0 TO THE WHITE COURTESY PHONE PLEASE......

85 on pump gas out of the box?

This is all rather interesting, if your into these kind of things. Years back (before the Serval) I ended up with a 7mil cub that was decked down to a 4mil (that basically made it near what a Serval is) from Redline that made 80/50 with T-5s. I only rode it once before I parted it and shipped the motor to Australia. Shortly after the Serval was released by CP and was "advertised" as an out of the box 80/50 deal. Well, as many know it takes some pretty good massaging to get them to 80/50. It can be done, but requires some added time by a builder to do some grinding in a few select places. So here we are now with the Driveline stuff that Lane and Bill were very careful on what they said they would make and simply implied that they would be "comparable"..... I think this pretty well puts the Driveline LP stuff in front of the Serval in an out of the box performance comparison.

Bent up junk! Sent from my SAMSUNG-SM-G891A using Tapatalk