nastyracing

these are the closest thing you will get to new in buying used parts everything has extremely low hrs on it as you can see in the pictures. re-active carbon fiber reeds 100$ shipped mint condition hot rods stock stroke crank 215$ shipped low hrs all these parts were bought new and built and not ridden much 65.5mm re-active mx style ported cylinders with fresh pistons and rings this top end is lucky if it has 8hrs run time on it 375$ shipped rickey stator 200 wat stator like new 200$ shipped complete stock trans 115$ shipped mint clean cases no chain wack zero issues 150$ shipped stock head 35$ shipped

Dont have cheap ones but have strong ones itp baha t9 reinforced ring rims 8" 100$ shipped.

fat bars and clamps are sold axle sold nerfs sold like new stator and flywheel 200$ shipped chrome duncan racing bumper chrome is in decent shape 100$ shipped complete rear brake set up could use new pads... 75$ shipped headlights and taillight all perfect working condition. one head light glass lense has crack running threw it. 60$ shipped for all three complete wiring hardness with cdi off a 99 everything minus the key switch, headlight on off switch is included. only three wires that have been cut are the key switch wires are spliced together and one black wire from on off switch was tapped into kill switch. otherwise very clean harness 125$ shipped sneak peak at mx ported cylinder done by re-active racing in PA. douglas champion front rims only not tires 135$ shipped

Pm sent

I will pm you pics tommrpw or pm me your email address i will send them right over to you.

I got you. I just sent you a pm with details thanks

Complete rear brake set up caliper to petal 75$ shipped with gifted paypal payment to getnastyraceing8@yahoo.com It could use new pads but already has block of plate on it and in perfect working condition

I have a mint uncut of 99 harness with headlist switch. No key switch tho. Two mint oem headlights perfect condition and working and a rear brake light complete with mounting hardware all shipped for 165$ with gifted paypal payment. I only things i dont have are the key switch and rear brake light switch

Cylinders ran strong low to mid mx port intake side is mild 148psi per cylinder dead on with a stock head . Most work was done in transfer smooth power delivery no arm wrenching power at any means revs fast makes great power all over the throttle. I am gonna try and sell topend with crank newer low hr hot rods crank for 650$ shipped will post pics of port work monday.

Honestly dude you have never been to a track and know the life style nor would you get help from a local or somebody with experiance just keep it moving along. Ddq is one of the most huble guys around, you are not gonna get very far with your attitude and way you speak to people. Have a nice day. On another note pm has been returned to other member.

Troll alert.. go to one of your local tracks you will learn alot .. or ask zacg he has some knowledge for you. Once again this is a fs Add will send pics and explain to customers thank you.

Seals and gasket and you will be back out ripping and enjoying. I will pm you pictures of complete package i told you by tuesday.

Obviously you havent been around long enough look up pictures of late 90's race bikes... tire size gearing shock set up valving a arm geometry porting specific to make power without the hard hitting arm wrenching design on the port work. Proper set up for the least rider fatique makes a good mx bike. If you knew what douglas champion and riken or kumoho radials were you would understand. I buy and sell the non run of the mil parts stuff that was the shit back in the day proven and no longer sold. On that note the rear turf tamers and champion wheels are not for sale they are mine. The front champion race wheels will however be up for sale and posted when i get the riken grooved front radials off of them. Nerf bars were sold locally to a buddy Fenders are pending payment. Bike will be ripped into a million peices monday night and listed with pictures i have been in the middle of rebuilding and preparing my mx bike for a race tommrow. Best way to reach me if you want to jump on any of the other parts before others is to text or call 732-979-5230

Cal lay off him son lol the nigga was in my garage last night practically built my whole R top end for me till 2 am last night just to get me on the gate to race sunday, far from a troll like others we see posting all over my adds w no knowledge what so ever. Cheers to that btw sheerider11! Take people for what they are worth if you read forums and listen to what others say and just run out and buy the shit your the fool. I say alot of things coded and people dont get the meanings of what i am saying the way i word it. But the locals here know. Boost bottle t5 your doing 100 mph. Put these rockets on your bike and you will blast off into outter space!!!

Cylinders are ported by re-active racing in pa mint newer hot rods crank both cylinders are at 148psi dead on set up nicely complete running topend piston and rings

650$ shipped i have a mint hot rods crank and ported topend cylinders head everything complete compression is dead even at 148psi per cylinder. Parting a clean mx banshee now as we speak pm me

with resi and dual rate old school tcs looking springs? normaly oem parts are marked showa ect ect i looked all over them for part number or manufacture nothing.

i got these with a bike I am parting out i am normally a suspension guru but i am a mx guy i have not a clue. the guy said he used them for when he drag raced asphalt and they lowered his front end they are 13" eye to eye. the valving and spring rate is so stiff i am unable to compress even the top spring to dissasemble and clean them and fully inspect them. I am trying to do some research to see exactly what shock they are any ideas? also if someone wants to make an offer pm me.

i can do 265$ shipped but that would be greyhound bus lines and you would have to pick up at the closest greyhound bus line to you.

Pull cap off and drop them on some people double side sticky tape them but really no need they fit tight against front of tank by frame and when you screw gas cap down thats what holds it down and keeps from flying off. But trust me it take finesse to get them off. stock air box pro flow plate uni foam filter and air box lid all complete 75$ shipped unmolested un cut on wire harness 100$ shipped cdi box 99 newer plug style 65$ shipped like new stator new plug style 100$ shipped flywheel 90$ shipped

laeger +2+1 silver vein mx a arms and works tripple rates no resi 640$ shipped with gifted payment they are valved for 190-210 lbs rider and these a arms carbon fiber tank covers 40$ shipped a peice blue fenders with alba graphics 200$ plus shipping chrome duncan bumper 100$ shipped mint headlights perfect condition 50$ shipped fmf fatty pipes and toomey silencers 300$ shipped fat bars pad and fat bar clamps 60$ shipped chrome front fender brackets 25$ shipped all these prices are with gifted payments if you dont want to gift add the paypal fees. my paypal is getnastyraceing8@yahoo.com i will get back to the rest of stuff and add to list as i get to it but if you need something fast. text my phone 732-979-5230

I have a mint hot rod crank pm sent

I have a set of full rears and front uncut with alba flame graphic kit on them. I am in nj i have greyhound shipped to other members for a decent cost. I am looking for 200$ + the shipping on them. Last time shipping was 65$ and was halfway across the country i will post pics tommrow.

Rocket2 r poorly designed rattle traps the oring part which joins pipes to silencers which is oringed is not very secure. Rockets seem to be made out of thicker guage material then r2 and most importantly original rockets are huge!!!

yes yes yes i have on a dialy basis, but you have never seen the way i package things shipping is gonna be close to 50$.. but hows this one sound 550$ plus actual shipping. not a penny less.