kawa110

Some body bug something!!!! I owe Claude for a LSR clamp I prolly won’t use…. Sent from my iPhone using Tapatalk

Replies sent. Sent from my iPhone using Tapatalk

Papered female Rotti bitch available. Beautiful girl. Will be the best family dog ever!!! guaranteed!!! Taking offers on rehoming fee. @banshee_desert_xc insta for pics. Msg for info. Sent from my iPhone using Tapatalk

Gold rims. One set with rolled lip one without. 100$ each Handle bars 30$each Stock a arms 80$ Rear shocks 80$each Front shocks 50$ Steering stem with bar clamp 70$ Complete engine gasket kits 35$ each Stock swing arms with carriers 80$ each K and n with outerwears for stock carbs 25$ Misc brake parts ask for pricing, front calipers, rears, master cylinders, lines ect… One headlight 20$ Cables clutch and e brake 10$ each Oem grab bar 20$ Oem head 20$ Fast head 80$ Clean oem rad with two sets of hoses 40$ Gytr skid plate for frame x2 80$ each Gytr oem a arm skids 60$ Gytr swingarm skid 80$ PRM swing arm skid 80$ Fmf silencers 80$ Fmf head pipes with silencers 300$ 350$ for head pipes and both sets of silencers. Misc stainless hardware mostly new. 60$ One set of beat rims and tires, hold air. 40$ Located 92256 I’m sure ther is more stuff I have pics but need someone to post them for me. I’m cheap and won’t pay Tapatalk. Sent from my iPhone using Tapatalk

Super nice machine, always liked this bike! More pics of it. Sounds “louded up” run it. Set pickup gap with business card? Sent from my iPhone using Tapatalk

Nice!!! Sent from my iPhone using Tapatalk

Wanted Prm Baja or summit bumper Thank you Sent from my iPhone using Tapatalk

Call redline, fast, driveline….any of the site sponsors will be happy to help you if money is not an issue. Sent from my iPhone using Tapatalk

.

Turf tamers Sent from my iPhone using Tapatalk

A new case will be more expensive then the labor. If top case needs changed, may as well replace all the seal, go through the trans, ensure cranks is in spec, and do a top end. Sent from my iPhone using Tapatalk

Yes. Included pivot bearings and complete carrier with bearings. Sent from my iPhone using Tapatalk

Sold. Delete. Sent from my iPhone using Tapatalk

Message sent. Sent from my iPhone using Tapatalk

New never used Pwk28’s. JJH needles, metal idle screws from FAST. New motion pro throttle cable. Includes stock needles and few jets. All new, never used. Used k and n filters 375$ shipped to the 48. PayPal gifted or cover fees. Sent from my iPhone using Tapatalk

Use grease to “hold” the o rings on head if needed. I’ve never used the copper spray. Sent from my iPhone using Tapatalk

Use sealer on metal mating surfaces such as shee cases. Paper gaskets for cylinder base and side covers. I don’t grease. Seen people grease paper gaskets to make removal easy and reusable. I don’t I replace them. Made plenty of paper gaskets from soda and beer box cardboard over the years. Seen metal gaskets for heads…either a “crush” style or copper plate/copper washers…no sealer. In a pinch I’ve taken the copper gaskets heated them until they “glow” and reused as long as they weren’t cracked or brittle. Sent from my iPhone using Tapatalk

Teflon tape the threads and run the cap down. Purchase pwk 28’s. Good upgrade. Sent from my iPhone using Tapatalk

Where you located? Sent from my iPhone using Tapatalk

All sold. Packages go out Monday. Apologies for delay. Thanks. Sent from my iPhone using Tapatalk

Sold.

Definitely something bouncing around in ther. May be in bearings somewhere or shot out the exhaust port. Sent from my iPhone using Tapatalk

Pwk28’s in for sale section. Sent from my iPhone using Tapatalk

250$ shipped to the 48 PayPal. U Add for fees Sent from my iPhone using Tapatalk

Okay. Thnx These are a nice upgrade to OEM. Sent from my iPhone using Tapatalk