I just picked up some 28mm PWK's and was just looking for a base line to start out at. I did read threw the (what mains are you running thread) and came up with some specs for sea level witch will help me when I ride at the coast but I also ride at 3500' so I need to know ware I should start out at.
Bike
Dune Port
Stock Stroke
65mm Bore
T5's
+4 Timing
Cool Head 20cc Domes
28mm PWK's
K&N Pods
Elevation 3500'
Carbs came with
140 Mains
58 Pilots
JJH Needles
Sound like the 140's might be ok but the 58 pilots sound way rich for 3500'
Nice set of T3's, uncut and no dents.
I will try to get some pics up later but if you give me your email I could send them there for ya.
PM me or send an email to janjmaul@msn.com
$140 + shipping
Got T3's on the bike right now and found a pretty cheap set of T4's. Would it make much difference to change to the T4's.
Bike is dune ported, cool head 20cc domes, and pods.
Got the bike all back togather and when ideling the left side pops and that pipe doesnt seem to get as warm. I went threw the carb and everything looked good so I even swaped the left carb from my other banshee and it does the same thing.
Elevation is 3400'
Main jet is 300
Pilot jet 30
Air screw 1.5
+4 timing