Jump to content

JUSTWANNARACE

Members
 View Profile  See their activity

  • Posts

    1,550

  • Joined

  • Last visited

  • Days Won

    33

 Content Type 

Everything posted by JUSTWANNARACE

  1. JUSTWANNARACE
    Look at your plugs they will tell you everything you need to know. Going from 32:1 to 40:1 is going to make it run a richer AFR
  2. JUSTWANNARACE
    364cc
  3. JUSTWANNARACE
    Looks like it may have been hydro locked at some point.. definitely looks bent in the pic.. I check it out a little more before running it..jmo
  4. JUSTWANNARACE
    Are you looking at the frame or the cases? The FRAME vin is on the lower frame rail on the left side underneath the stator.
  5. JUSTWANNARACE
    Most likely needs a new head gasket then. I would assume its seeping from the head studs
  6. JUSTWANNARACE
    Stock head or billet head? If it a billet head pull it off and check the orings. When reinstalling use copper washers and acorn nuts, put a little 1211, 1184 or yamabond in the acorn nut before you put them on.
  7. JUSTWANNARACE
    30 years ago someone thought they were needed. They are not. Right in the trash is where they go. They ARE needed if you want to "shock the clutch"... but.. that's just a "hairflip"...
  8. JUSTWANNARACE
    Yea so they make their own stinger tubes and silencers for T5 pipes is what I get out of it! And honestly it looks like Toomey silencers also. Not sure on the stingers but those are probably toomey also.
  9. JUSTWANNARACE
    AIRBOX VENTS FOR THE STOCK AIRBOX, A HIGH EFFICIENCY 2-STAGE UNI- FILTER FOR THE STOCK BOX, PERFECT JETTING KIT, POLISHED CHROME T5 PIPE BODIES, SILENCERS, STI copy and pasted from the verbiage on their description on the web site!
  10. JUSTWANNARACE
    Nothing.. that's what I usually use!!
  11. JUSTWANNARACE
    https://www.motionpro.com/product/08-0472
  12. JUSTWANNARACE
    You can. LA Sleeve will have parts. ESR, NIX and Pro X are all the same LA Sleeve cyl
  13. JUSTWANNARACE
    They take a ton of port work to run well but the do run decent once worked over. Are they going to out perform your serval, no probably not. But not a bad cyl by no means, better than stock for sure.
  14. JUSTWANNARACE
    Can you get a pic?
  15. JUSTWANNARACE
    If it is rectangular than it is probably an LA Sleeve cyl they used 250r reeds also
  16. JUSTWANNARACE
    Cheetah.. they use a 250r Reed cage
  17. JUSTWANNARACE
    Sounds to me that you are missing one of the big space washers either behind the basket or in front of it. There should be one in both places
  18. JUSTWANNARACE
    That shit is fucking itchy!
  19. JUSTWANNARACE
    That would actually probably work really well.. looks basically like the FMF 2stroke packing
  20. JUSTWANNARACE
    36mm diameter seems pretty small that's only like 1 1/2"
  21. JUSTWANNARACE
    Amarican Star Racing
  22. JUSTWANNARACE
    There is nothing with that ignition that resembles a PVL except to the flywheel and it's not the same either. The pick up is nothing even close to a PVL
  23. JUSTWANNARACE
    Not a pvl.. it would have 2 pickups and 2 coils. The flywheel looks similar to a pvl.
  24. JUSTWANNARACE
    Looks like a motofast?
  25. JUSTWANNARACE
    Have you blown out the holes? Stock bolts are a little shorter and will get dirt behind them. Also do you have the rubber gasket on the cover?

BHQ Quick Links

×
×
  • Create New...