Bobby Banshee

Hey guys, I have a alsome banshee for trade. I recently started attemping to do some woods racing and bought a yfz450 to run. The banshee just doesn't handle as well. Anyways, here's a list of a few things I recent put on it. Everything was bought and put on in a 3 months time frame. Its only had about 30 miles on the bike. I want to trade for a street bike or a boat of = value. $200-Gas Tank 5.5gal. $228- yzf450 Shocks $89-K&N Air Filter Lid $90 K&N Box Filter $100-Trail Tech Computer $106-Trail Tech Mount $175-Billet Aluminum Intake with cross over tube $80-Billet Aluminum Kick Starter $23-Billet Aluminum Dip Stick $60-Billet Aluminum water pump $389-7pc Billet Aluminum Kit all chrome $90-High Rev CDI Box $198-V Force 3 Reed Valves $18-Stainless Bolt Kit $185-Ricky 200watt Stator $53-New Steering Stem $21-New Rear Bearings $18-Steering Stem Bearings $60-4 Tie Rod Ends $110-Front Bumper $110-Body Skid Plate $33-Gear Shifter $30-Radiator Grill $64-Twist Throttle $85-Swing Arm Skid Plate $89-Chain/Sprockets $80-Fat Bars $225-Razor Tires $50-Carb Jets $250-Chrome Clutch Cover and Polished Cylinders $10-Aluminum Block Off Plate $27-Perch&Lever $27-Modquad Case Saver $1495-Motor(Vito 4 mil crank, aggressive trail/woods port on cylinders, cool head, pistons 100 over). Total_$4868

I ordered all the billet and had it chromed.

Here's a few things that have been added to the bike. Kevin Herr did all the motor work. All this has been added to the bike with about 30 miles on it. Need 4k for the bike. $200-Gas Tank 5.5gal. $228- yzf450 Shocks $89-K&N Air Filter Lid $90 K&N Box Filter $100-Trail Tech Computer $106-Trail Tech Mount $175-Billet Aluminum Intake with cross over tube $80-Billet Aluminum Kick Starter $23-Billet Aluminum Dip Stick $60-Billet Aluminum water pump $389-7pc Billet Aluminum Kit all chrome $90-High Rev CDI Box $198-V Force 3 Reed Valves $18-Stainless Bolt Kit $185-Ricky 200watt Stator $53-New Steering Stem $21-New Rear Bearings $18-Steering Stem Bearings $60-4 Tie Rod Ends $110-Front Bumper $110-Body Skid Plate $33-Gear Shifter $30-Radiator Grill $64-Twist Throttle $85-Swing Arm Skid Plate $89-Chain/Sprockets $80-Fat Bars $225-Razor Tires $50-Carb Jets $250-Chrome Clutch Cover and Polished Cylinders $10-Aluminum Block Off Plate $27-Perch&Lever $27-Modquad Case Saver $1495-Motor(Vito 4 mil crank, aggressive trail/woods port on cylinders, cool head, pistons 100 over). Total_$4868

Kevin ported my cylinders with the aggressive woods port. He did an excellent job and like stated above, his customer service is the best.

Does anyone know were a fellow can get a good graphics kit to fit a oversized clark 5.5 gal. tank for a banshee.

How many turns out can you have the air screws on stock carbs without it being unsafe.

These are good shocks, someone buy them.

I have 2 good progressive 512 series shocks sitting around if anyone is interested in them. There a good upgrade from oem. I'll take $150 shipped if anyone's interested. Thanks Bobby Walker,,,,my cell is 615-207-9242

bump

Any YZF450's out there????

I have a new ricky stator 200 watt in the box i paided 180 for. I'll take 150 if interested.

Shannon, i called Kevin earlier in the day. He seams to think its possible a air leak somewhere. I'm still having the same issue as well. I'm getting 185psi with 22+2 domes with a 4mil and woods port.

I've never heard of a jetting issue effect the compression. With your different cylinders being so far off, it looks like your rings haven't seated on the one side.

No, i was in the middle of putting on a 14 tooth sprocket on the front when someone was wanting some pictures. Also, the clark 5.5gas tank and the yzf450 haven't been put on yet.

Hey, guys. Looking to sell or trade for a YZF450 if anyone's interested. Whats something like this worth. Thanks Here's a list of stuff done to the bike. $200-Clard Gas Tank 5.5gal. $228- yzf450 Shocks $89-K&N Air Filter Lid $90 K&N Box Filter $100-Trail Tech Computer $106-Trail Tech Mount $175-Billet Aluminum Intake with cross over tube $80-Billet Aluminum Kick Starter $23-Billet Aluminum Dip Stick $60-Billet Aluminum water pump $389-7pc Billet Aluminum Kit all chrome $90-High Rev CDI Box $198-V Force 3 Reed Valves $18-Stainless Bolt Kit $185-Ricky 200watt Stator $53-New Steering Stem $21-New Rear Bearings $18-Steering Stem Bearings $60-4 Tie Rod Ends $110-Front Bumper $110-Body Skid Plate $33-Gear Shifter $30-Radiator Grill $64-Twist Throttle $85-Swing Arm Skid Plate $89-Chain/Sprockets $80-Fat Bars $225-Brand new Razor Tires $50-Carb Jets $250-Chrome Clutch Cover and Polished Cylinders $10-Aluminum Block Off Plate $27-Perch&Lever $27-Modquad Case Saver $1495-Motor(Vito 4 mil crank, aggressive trail/woods port on cylinders, cool head, pistons 100 over). Total_$4868 All this stuff has been put on in the past 3 months with on 2 rides. Here's a few pics. Hope I done that right.