Jump to content

Coupelx

Members
 View Profile  See their activity

  • Posts

    3,569

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by Coupelx

  1. Coupelx
    You buy what suits your current setup. you dont buy big with the idea "oh ill grow into it". it makes for a mediocre setup that is disappointing. This applies to all aspects.
  2. Coupelx
    I used the gasket.
  3. Coupelx
    Its purpose is to provide tension to keep slop out. technical name is a belleville washer. my hinson was just barely snug.
  4. Coupelx
    Bikebandit shows it like starwriter said. When looking at it sitting on the gear you should be looking at the inside of the cone of the washer not the dome of it. Thats the best way i can think to explain it.
  5. Coupelx
    Starwriter might be right. It would make sense with the little gasket deal that goes in there. I know it only goes one way too.
  6. Coupelx
    Happy trails!
  7. Coupelx
    Theres a wave shaped washer that goes between the basket and the gear. if its not in there it will be loose like that.
  8. Coupelx
    if i were you i would make it my mission to troll every post he makes in the fs forum. thats what i did with the faggot from canada that screwed me on some shocks. its funny i havent seen him around in awhile
  9. Coupelx
    take your bitch ass back to the blaster forums.
  10. Coupelx
    Need a ban for this pussy ass bitch
  11. Coupelx
    Dont be giving this faggot any useful information.
  12. Coupelx
    No one here fuckin read or comprehend any more? I am well aware of who had the issues. Neither of you are aware of who I am talking about apparently which now that i think about it is probably a good thing.
  13. Coupelx
    Factory they are different but word is you can run a maxload on the countershaft.
  14. Coupelx
    No one mentioned failures. Funny you pulled that out so fast. Gary aka Sheerider1026 rewinds stators. Stock and aftermarket junk.
  15. Coupelx
    Sheerider1029 said the cdi is picky about the voltage it gets from the stator.
  16. Coupelx
    Yea im an attention seeker. Caught me red handed. Next time you want to make fun of someone at least spell their name right. And i will stick by my comment that air doesnt like sharp edges, especially fast moving air. Run your mouth all you want, you are an ignorant little shit who is butthurt because of what was posted on the internet.
  17. Coupelx
    Dont know why i am continuing to post with the sheer stupidity in this thread but it has progressed (degressed?) to name calling which amuses me. It proves your ignorance. the best thing would be for virginstar to leave bhq. he has forever been marked as a fuck.
  18. Coupelx
    haha owned.
  19. Coupelx
    No. Says the guy spouting off at the mouth... knife edging is for people who have no idea what they are doing. Do air planes have knife edging?
  20. Coupelx
    you are an epic fucking moron. porting isnt hard. its learning to do it correctly that is hard.
  21. Coupelx
    Long punch or piece of rod
  22. Coupelx
    I have them on my motorcycle. Work alright.
  23. Coupelx
    Its a great way to make the bike turn like shit amd break ball joints.
  24. Coupelx
    I bought my a arms from him awhile back with no issues. but this thread needs pics.
  25. Coupelx
    Its purpose is to keep you from destroying the bearings when you crank the fuckin nut tight. I doubt that the axle has anything to do with this. mine fit fine and i used a giant crescent wrench on the nut. its almost eye watering tight. it had been in both a stock carrier and now a jj&a dual row carrier

BHQ Quick Links

×
×
  • Create New...