banshee freak

Wow, I just paid 80$ two weeks ago which should be here this week!

?

Let me know when it's shipped please

Payment sent!!85$ thanks!

Hey I pmed you for that grill, let me know the process so we can get me one and you some cash!

Ship to Canada Ontario ?

Stupid auto correct pmed you for the reeds

Ones you for reeds

Id like one of those banshee flame grilles if you still make them? How much shipped to Canada , Ontario postal code p3p1s4? Thanks

A good way to oil your stock filter is to pour some filter oil in a baggy and squeeze your filter in there. that way your filter will suck the oil in and your sure to have the same amount of oil everywhere...just something I used to do.

PM sent for carbs e-mail me @mike_1784@hotmail.com

thanks guys weird thing is tho...im running rich! my plugs are black....id rather a little rich that too lean but I was actually thinkin of going down in size my elevation is approx 960 ft..im on the third clip I beleive and run 25 pilot if my memory serves me right....I havent worked in the carb for a while cus of the snow so.... anyway thanks for the posts

hey guys Does anyone know sea level at the Silverlake dunes in Michigan? Im from Canada, Ontario but i'm planning a trip with a bunch of buddies this summer. right now im running 290 for mains in my stock carbs 03 banshee ported and polished v-3 reeds barnett clutch kit PWR radiator high flow billet impellor front fmf gnarly's with rear t-5 silencers open air box w/K&N and all the cosmetic stuff any info would be greatly appreciated

ok guys, well I went back to that local shop and I had messed up on the piston gap, ive only got .03-.04 so thats good but what ended up happening is that the wsm piston rings didnt match the pistons, the gap was0.25 which is retarded, so I called up WSM adn they are sending me some 0.5 rings for free, plus they are paying shipping to canada!! awsome service...anyway..that brings me to this question ..do u guys think that the 0.5 rings will fit tight on the 0.25 pistons?? my local shop seems to think so..... thanks FOR ALL replies guys!!

hey guys, well I bought a set of port and polish jugs off a guy on ebay, then I bought a 0.25 piston and ring set so I brought the cylinders to get bored over. When I picked them up everything looked fine,so I just brought them home. I just found out about that ring gap so I measured them and its about 0.25!!!isnt it suppose to be 0.12?? anyway so that kind pisses me off but then I also checked the piston clearance on the sides and I hear its suppose to be 0.04 and I have 0.10 if anyone knows what would fix this, im thinking bigger pistons.....the pistons and rings are WSM. someone please help!!