okbeast

I don't ever sell stuff because I hate losing money! But yes $125 is low but if he was going to come to to 175 that seems decent. Sent from my LG-D850 using Tapatalk

Seems like a great part here. Although I wouldn't bitch if I put open to offers and only come down from $200 to $190 lol Sent from my LG-D850 using Tapatalk

Doin the stanky leg Sent from my LG-D850 using Tapatalk

Been trying to get ahold of lsps store to book our spots because one of them won't book online and they never answer their phone. Sent from my LG-D850 using Tapatalk

Shmedium gray.

Are you bringing the wife?

I'm not sure, I've just got an extra set of stockers at home.

Luckily I've got a set of those $500 cases!

Who cut it?

Got a set of the original Stellar dune arms, I wanna say they're 1.5" wider and 1" forward. I'll have to open the box up to make sure the tierods are there. Not sure what they're worth?

You mentioned Kevin did the port work, did he set up the domes also? I would check with him on this issue if so. A lot of times port work may show a lower kicking compression number which can be misleading.

Pic below. One tire has a plug in it. When I ran them at 3-4 psi they would stay aired up for the day. If they went on a track bike with more pressure I think they'd be fine. Not sure what to ask make me an offer

Setup sold. Trx510r I have another set of tires available for cheap not sure what you were looking for.

3-spoke JJ&A hubs, 10x4 rims, and 18.5" smooth buff tires for sale. The hubs are for a YFZ/Raptor but will work on a banshee with 5/8" straight spindles. No bearings or spacers included, JJ&A sells them for $80. Tires have 2 trips to the dunes on them. One holds air well for 2 weeks and one only holds 2 days, possibly just leaking around the bead but wanted to be honest. Just put a decent polish on the rims. $300 OBO. Can take some more pics if needed.

Check out my add on the BHQ Facebook page, I'll get it loaded on here tmrw.

I only remember one collar going on from the bottom side but it's been awhile since I've torn one down

Check out bikebandit.com for a detailed drawing.

Oh I hear ya id definitely leave it there for awhile and try.

Nice truck and glws. Might have to end up coming down some I've got a buddy who just got a '15 loaded for right at $40K.

I'm just south of fort worth and we'll go up to the red river at highway 79 sometimes. Depends what type of riding you like to do.

Tapered or 5/8 spindles?

Thought about Rotella or some 4T but stick with the ATF. What Rotella ya'll run?

Eh just a few bolts and double checking the alignment.

Ah well I've got one in dfw I could have let you borrow or buy but I'm too lazy to ship. Best bet is to find someone who is going to the ride with one

Where are you located?