gomerkfx700

http://swv.craigslist.org/mcy/3585711876.html Hear is another total fuck tard bikes been listed 10 different was all at the same time for anywere from 2500 to 1200 Now he has another add that is the same as the original one with that turd http://swv.craigslist.org/mcy/3593201621.html Make him pay for being a dumbshit

I knew it wasn't a beach but I didn't know if it was sand or like sand

Well everyone still has them listed but you know how that goes I leaning towards the bearclaws does anyone anyone have some pics of bear claws and swamp witch's or mud sharks

I'm looking for a set of swampers or vampires. Would rather have vampires. I know thecoal hill guys use them a lot but I cant find them. How does the bear claws fair in mud ive used the itp mud lutes and don't care for them to many flats. Also has anyone rode these tires in sand I'm wanting to go to busco beach for the ride but will I need paddles or can I get buy with these tires ive mentioned above thanks.

Keep me informed on how you like it after shes tuned in

When i get things together we will know what they do on the dyno on a serval im goin to get a set of carbs hear in a little probably 33 pwks

Well i got to ask what is okos..... as for the rokets i thought about them but i just like the dmcs no dalt they may make more power ans are cheaper just not what im looking for.

Sounds like i need a tors eliminator kit for now then I was actually thinking of having a local shop build the intake on tje 2-1 if i went that direction and run say a 42-44 lectron but id have to buy one to build it buy and i think that's just to much money

How you think the 421 serv would do with a 2 into 1 would it be a pure dog on top

Ive had t5's on stock banshees before and never really cared for the total lack of bottom end they had liked the fmfs i had better than the t5's for the trail but stretched out they seemed better

Ive been reading all morning and havnt found this combo. Has anyone tries this? I like the looks and sound of the 916's better then any non drag pipe. And correct me if im wrong but ive seen quoted several times that they are comparable to pcp on bottom with the topend and over rev of t5's if this is fact they are just what i want. Im hoping to build a very torque oriented motor with a goal of low to mid 70's hp i may even bump up the compression to race gas territory to get more bottom end and to make my hp goals. Still deciding on carbs may go with stock or 2-1 (non trinity) or 32mm tms any input on this would be great thanks. And the reason for wanting the power like i do is to get my fat 375lb ass moving just in case anyone was wondering

Waste of a good set of tires! There to thin if you hook hard with snowmo spikes they will rip out leaving you with a nice bon fire starter

No problem boxed and ready to go

These are big bore pipes exhaust exit measures 1" fat part of pipe is 16-5/8 an from tip of stinger to last weld towards head with were pipe begins to taper towards the head is 27"

That is usa only no out of country please

Cpi out of frame pipes that i once had now have them again are back forsale they are small bore one out each side. Asking 275 shipped

Pm replied ill take them

What year are the stators im in need of one and the flywheel u do a package deal for me

Like i said i think i didn't say it was because i have never owned or wanted to own them and the only set of the ugly bastards ive seen in person was on a set of pc head pipes

On; the topic of the sound i think it is the pc 916 silencers are 2 into 1 and sound pretty cool i have no clue on how the dyno port sounds to compare it to though. And on a side note dont let these fuckers get to you most have no clue except for what there builder tells them and are a bunch of web racers. I say fuck them all hahahaba

Wheelman is top of the line i tried to explain to hm what i wanted in a pm and i really think i just confused him so i called him man we shot the shit for a hour and he got the idea i had for my a arms. Now to save up a little more cash

Thanks wheelman that was fast lol

Any one know how to get in contact with wheelman ive emailed and tried to call him no responce

welp ive talked tom cam and if all goes well and my bonus is on this cheek ill be sending my tranny out to him. i really like the sound of what he does to them and how reliable they seem to be from what ive read. and he seems like a real nice guy

i will do that are they any others out there. that does good work ive searched and i know of a few. but was wanting to hear what the population recommended