spurdy

I have one complete to trade for the old style SP

That was absolutely fucking hilarious! English, grammer, information, the whole thing! Yeah, didn't you know boost bottles were only for dual carbs? Of course since its a 180 degree crank, unlike my snowblower that's a 270 degree crank with 2 cylinders! ROFLMAO! We really shouldn't poke fun, or should we? Lol! SP

Its all good brother! Blame me if you need to. I get blames for shit all the time! I got broad shoulders, I can take! Lol! Get er done! I wanna see you there with bells on! Heading home this weekend and hopefully get my jugs back on and motor back in. I am ready! Only thing left is the swinger! Tim said it should be done in time, it will depend on if I have the time to put it on. That thing should be sick! I ordered the 6 over arched in chrome. I can't wait! SP

Just found out our service meeting was moved to the 17th of April. That leaves me open for the weekend of the 10th! I may be able to swing Snake Hunt after all! Did you say you were gonna be there Cam? SP

Kevin wanted to change some porting since I changed from CPIs to Shearers. Override tranny, primary gear to change (have to test to see how big) driven gear may change. Little clutch work. Some new colors from NitroTate (rock on Tate! He did an awesome job!) and from Jason (quaddad). Haven't seen Jason's yet cause I am out of town. SP

73 mph in sand (very smooth sand first thing in the morning) with 13/41 gears 21" haulers, 4 mil HJR port with shearers. Checked by radar gun. 63 mph on a piped and ported honda 450R. 38 mph with a 40lbs jockey on a 250ex. Reworked porting and new tranny gearing on the HJR. Waiting to see the difference. 100 mph is hard to come by on a 350 motor for sure. Even on pavement. Regular tires don't spin well at that speed! SP

My boy is in the process of tearing his bike down to the frame. He only has the steering stem and the swing arm to take off and it is bare. He doesn't work on it much unless I am home. We aren't in any hurry. He isn't gonna be ready for a bike that big for a couple of years! Lol! I am sure he'll be riding it long before he is ready! Do you have to prep the parts for this cat or does he do it? SP

I want in! I have a frame at the minimum that needs powder. SP

Ditch the boost bottle. More of a sleeper look yet SP

I'll entertain your wife! Lmao! JK.....She does a pretty good job of entertaining herself. Its all good brother! SP

You can spend just about as much as you want on suspension. The Elka rear with there special link runs $1250. You can have your stock shock re sprung and valved from several places for around $300 depending on what they have to do to it. Or you can just have it re sprung for the 4 over. Fronts-You can pick up a set of YFZ 450 shocks for around $200. Elkas will run $500 - $1200 depending on the type of adjustment you require from them. I think Wiorks, TSC, Fox, and all the others are about in the same price range. SP

Awesome, I'll have to check the school schedule and sweet talk momma to see if she'll let him go! But I'll be there for sure. I am thinking that I'm gonna make this trip with the 4 over and wait to install the 6 until next trip. Kinda want to be able to compare the new porting to the old with the same set up. But who knows, if Tim gets it done in time and it shows up I might not be able to resist putting it on! SP

Sweet! Still have room for me and Ethan, if mom let's him skip on school!? SP

If Sarge is in that weekend then I'll try and make it to! SP

That was some funny ass shit right there Mr. McGyver! Get that beast runnin Bob! I wanna see how well a F.A.S.T. motor does against Kevin's work! You know, just a little friendly competition! I think I am ready to turn a 10 now. You still up for traded if I like em? SP

I have a pair of both and I don't like one more then the other. SP

Not sure if you were replying to my post or not but I was referring to ordering new from Worldwide Performance. If your gonna spend that kind of money on shocks I would definitely order new and have them valved for the proper weight and riding conditions. SP

You can get a set of Elkas from Worldwide Performance Parts http://www.worldwideperformance1.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ELKA-007&Category_Code= cheaper then you can buy them from Elka for because of the discount and the volume they sell. I got a set of Dual Rate Piggybacks with Preload and Compression adjustment for $770. If you want the Rebound adjustment you can add almost another $200. Or you can get the base shock with no res and only Preload adjustment for $450. I love mine and think they were well worth the money. I may have been just as happy with the 450's but I have no regrets. SP

I have a good stock stator that has the new style plug with the flat blades. I would like to trade it for the old style with the round pins. I have 2 wiring harnesses and they are both the old style. SP

Get your ass in gear then! I wanna see that cub run! You got over a month! Lets get r done! SP

X 2 !!!

Hell Yeah! I used bring something just like that to the dunes a few years back. Had a little 110vac fridge in it with a 110 window unit and a propane stove! Wife made me sell it cause it was ugly. Now that she comes to the dunes with me she wishes we had it back! Lol! SP

Just like it says. Need to buy a +6 swinger. Roundhouse carrier. With or without carrier. Preferably chrome. Would like a ladder style but open to anything. SP

We can get it sometimes up here. Didn't even know they made it in cans.

Cheap beer? Life's too short to drink cheap beer. And I only buy beer in MO. The same high octane stuff you get in TX. I just bring Miller Light cause its better then Bud Light, it comes in 30 packs, and its not glass. In fact, I don't think I've bought Miller Light since the last dune trip! If you wanna bring some good beer, Tim, bring some of that Texas brewed Shiner! I'll make sure that gets drank first! Lol! Good to hear Tanner is gonna be there too. What "new" cylinders do you have? SP