spurdy

Sold! Sent from my iPhone using Tapatalk

Ok. It's a 30". Comes with all keys and snap rings. Will be polished up. Yeah, work bench is a mess. Lots of shit going on. Lol! Sent from my iPhone using Tapatalk

Yeah, just dusty. Sent from my iPhone using Tapatalk

Bustin my balls. $250 shipped. Sent from my iPhone using Tapatalk

I think it is a 28". Will know shortly. Gun drilled. Not anodized. Comes with all hardware but no hubs. Just a spare axle. Interest? Sent from my iPhone using Tapatalk

Sold Sent from my iPhone using Tapatalk

$135 shipped. Text me at 8168889841 Serious inquiries only. I've got little patience for tire kickers. Not being a dick but too much of that lately. Sent from my iPhone using Tapatalk

$85 shipped. Text me at 8168889841 Serious inquiries only. I've got little patience for tire kickers. Not being a dick but too much of that lately. Sent from my iPhone using Tapatalk

$350 shipped. Like new. Text me at 8168889841 Serious inquiries only. I've got little patience for tire kickers. Not being a dick but too much of that lately. Sent from my iPhone using Tapatalk

$220 shipped Complete from throttle to filter with 33mm PWK. Two sets of reeds and 14 used (but reusable) gaskets. Including all fasteners. Text me at 8168889841 Serious inquiries only. I've got little patience for tire kickers. Not being a dick but too much of that lately. Sent from my iPhone using Tapatalk

$40 shipped Text to 8168889841 Sent from my iPhone using Tapatalk

$85 shipped on 35mm intakes $45 shipped on stock intakes. Text me at 8168889841 Serious inquiries only. I've got little patience for tire kickers. Not being a dick but too much of that lately. Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

PT mids (damn sp) $350 shipped Text me at 8168889841 Serious inquiries only. I've got little patience for tire kickers. Not being a dick but too much of that lately. Sent from my iPhone using Tapatalk

DDQ, will you weld my flywheel? Sent from my iPhone using Tapatalk

I'm gonna go out on a bit of a limb here and say that if you don't experience clutch creep when your clutch is hot, then your clutch isn't fully engaged with the lever out and is slipping when under a heavy load. Sent from my iPhone using Tapatalk

It's called clutch creep and everyone experiences it. It can be worse with a clutch that isn't adjusted correctly. I always clean mine out in N and only shift into gear when I'm ready and I think they are ready. Something you'll have to get used too. If you have an adjustable clutch lever like an ASV, you might get a little more throw out of it and that cAn help too. Sent from my iPhone using Tapatalk

Like the other guys said, don't be afraid to ask questions. Most builders will be happy to make you comfortable. Besides, the more you know and understand and the better equipped you are to deal with your motor and setup, the more likely you will wind up being a return customer. Sent from my iPhone using Tapatalk

That being said, I run 35 pwks on a 4m stk cyl with an aggressive dune port with open air intake and shearer pipes. I've also ran a 33 pwk on a 350 with open air intake and PTs. So a smaller carb will work but it does really depend on your set up and riding goals. Sent from my iPhone using Tapatalk

Bore differences aren't gonna make squat for carbs needed. You're talking about 11 cc difference in displacement per cylinder from a 64 bore to a 66 bore. Sent from my iPhone using Tapatalk

Depends on if you want a needle bearing or a ball bearing. I've done both but don't have the bearing numbers with me. Sent from my iPhone using Tapatalk

I don't understand how they pour fuel into the cylinders. Fuel is drawn into the cylinders by the air flow of the motor....piston going down. If the carb flows fuel from a float or needle issue, it should just overfill the bowl and run out the overflow onto the ground. Sent from my iPhone using Tapatalk

Damn! You should sell my PTs for me! Sent from my iPhone using Tapatalk

Yeah, what I do with my funky finger...lol!...I'll never tell! Who the fuck is Tyler Clark anyway. I hear he drinks Ryan's bath water. Freaks. And thanks oldschool! Cheers to all!

4 over lonestar needing re chromed. $250 8 over metal tech like new $400 10 over billet lonestar $400 (sold) Text me at 816-213-8504 for questions or if interested.