FASTOYS

w/a 10mm Serval, our clutch with NEW inner and outer hubs and HD springs will hold for awhile BUT you will need a lockup eventually, especially if doing a ton of dragging/launching on pavement.

33PWKs may be good for your application..... !?? They work good on alot of our setups for MX or Woods bikes wanting hp everywhere.

Not a fan of aftermarket stators/flywheels... Seen several quit when least expected and several aftermarket flywheels come apart. : ( Tors removal kit is great, parking brake block off is good, this would be the time to install a timing plate....Check out our site for more ideas..

No biggie, There is roughly 20 links per foot. 20 links x 6 ft = 120 links Plus we usually throw an extra link or 2 in there for good measure. So If we sold 6 foot ( which is roughly 120 links) according to your calculations he would have 5 links EXTRA, NOT 3 pins too short. PLUS whatever extra we throw in . We have literally sold Hundreds of chains and none were too short. We'll keep doing what works for us.

6 foot Not for sure on lengths as we sell it by the foot..

Some real good parts in that mtr for sure !!! Made great power for a Play Port!!! Good luck with sales... bump

Your gonna run a Serval in +24" front and 10 out the back??/ Might be better off w/a Cub... I would say go Hauler SLS for your setup.... Not a fan of the 18pdl stagger brats! Love the 9brats but not for you setup.

Where in Neb. are you ?? May be close to us...? A 10mm Super should be around 100+ hp mark on gas and 120+ on alky out of the box and well tuned.... These are rough #s as all dynos are different and seems so many people are using wrong setups here lately ie. domes , squish, timing , pipes , etc.... Most 421 on Alky will put out more than 97hp too, usually in the 108 + range conservatively! Again , maybe your on a stingy dyno, maybe no case porting, maybe inframes, so many variables......

Still have them at sale price ...gonna extend the sale for awhile longer. : )

We still have some availlable and will be extending the sale!!!!!!!!! Give us a shout.....

I would tend to agree with this. Just by looking/comparing/measuring etc.. the 2s,3s, and 4s... I can tell you they "LOOK" like they will be better than the 3s. Prolly bout as good as 2s like mentioned and they definetly seal better! Here is our observations/pics : http://bansheehq.com/forums/index.php?showtopic=158957&st=0

http://bansheehq.com/forums/index.php?showtopic=158957&st=0#entry1387860

We are excited to be getting these in our hands this Thursday, and already have serveral pre-sold . The petals are made of different thickness/material and there is alot of redesigning involved. They work better all around on most all different setups and will have longer reed life especially on alky.. There are several threads on these reeds showing they make more HP/tq. We our having a 1 week Introductory SALE PRICE of $200 shipped!!!! Sale will end Friday 14th OR when we run out of our buy in order... so call asap!

bump

We are excited to be getting these in our hands this Thursday, and already have serveral pre-sold . The petals are made of different thickness/material and there is alot of redesigning involved. They work better all around on most all different setups and will have longer reed life especially on alky.. We our having a 1 week Introductory SALE PRICE of $200 shipped!!!! Sale will end Friday 14th OR when we run out of our buy in order... so call asap!

We too only know like the above post says... as we havent tested them yet, BUT we have a bunch of them ordered and they will be in our hands Thursday!!! I did talk to Jeff at Moto Tassinari and he said they tested these on several Banshee motor setups w/gains on all of them across the board and better realiability, especially on alcohol ! Sale Priced $200 SHIPPED !!!!!!!!! Thanks, Jeff

Still got a few sets in stock... Great Dirt tires!!

yes, that and St Anthony in Idaho rock!

Very nice. How many acres? Wonder if its worth the 12-14 hour drive to check it out??

Cool riding area...where is that ? Killpecker Dunes ?

Finally got these back in stock..... http://bansheehq.com/forums/index.php?showtopic=158309