FASTOYS

Have a buddy that wants a 6 over and has his 10 for sale.... Rnd house w/flame carrier chrome.

Jt , if you dont find a used one let me know, as i have a new ALum. 45t on the wall.

Clutch/pancake bearing install should take less than an hour usually. Get ahold of me if you have any ??s or need help.

Power wise i dont think you will see any difference between the 2. Here is another option for you too and its cheaper than Vitos and easier to get orings and domes for : http://www.farmandsandtoys.com/partdetail.asp?partid=183 or : http://www.bansheehq.com/forums/index.php?showtopic=78979

Jesse if its not a porting job we can handle it. Porting is what we are behind on and working around the clock on to get caught up on.

Im pretty sure i have a stock Banshee brake hub laying around, i will give it to you , just pay the ride. Give me a call at the shop. 785-364-5325 Sat. 10-2 central time

700s are VERY fun bikes! I rode the wifes some at St Anthony dunes and i cant find any flaws about it. It is a bone stock 06 and is a blast to ride. Easy to ride and lots of torque. You have to almost short shift them as they dont like to rev like a 450. Awesome trail/dune bike to add to your stable !

I use that 3 bond 1211 like you have as it is MUCH easier to use than Yamabond. Use your finger and put it on both case halves lightly but thourouly (sp?) Make sure seals, shift forks, etc have grease/oil mix on them so as not to start up dry ! Also double, triple check 2l dowels in the case halves too.

Cool , Looking forward to helping you, let me know its BenBB when you call!

Ben , give me a ring and i will dig as im sure i have everything you need to get going ! 785-364-5325

Brandon , please get me a pic of it if you can and a description and i will post it up and keep an eye/ear open. I have ZERO tolerance for thieves!!

Brenten, I have several used heads Noss, and Pro Design and also some used domes. Give me a call and i will look through the stack and see what meets your requirements!$ 785-364-5325

I have several used heads Noss, and Pro Design and also some used domes. Give me a call and i will look through the stack and see what meets your requirements!$ 785-364-5325

Congrats to both of you!!! :beer: I see jockeys in your future. jk lol

If your comparing a stock YFZ to a piped, jetted, geared, etc. Banshee than yeah they may not Feel as fast but they do make more torque and put it to the ground more efficiently. Go ride a bone stock Banshee and race the 2 and see the outcome.

Looks too lean for your altitude or bad gas. Send me some pics of the cyls and will see if they can be honed.

I had troubles this morning so we will check it out and try to get the site fixed today. Thanks for the heads up.

Honestly if you want a good overall powerband then just go with Play/Dune port stock cylinders. If you really want a Cub setup than check with a builder as i have seen time and time again the ebay thing not pan out. Seems like we are constantly helping people who bought from so called cheaper ebay and didnt get the correct setup or didnt get all the parts to complete the job. So by the time you ship stuff from other places and make calls etc. then ebay wasnt so cheap! Theres an old saying " you can go broke saving money" !!! Here is a good place to start! http://www.farmandsandtoys.com/partdetail.asp?partid=129

You dont need a lockup for that setup when our 95.00 clutch will work fine. Prolly need the inner and outer hubs as well now that they are worn. Give us a call or pm.

Definetly one of these and a timing plate will help. http://www.farmandsandtoys.com/partdetail.asp?partid=183

We have all those parts on hand and have shipped to you before!! :thumbsup:

Exactly :thumbsup: Bigdaddy, your first post was that it wasnt fast enough but your last post says you havent been beat in the sand but cant hook up on dirt. I can give you all the power in the world BUT its up to YOU to hook it up. Are you running stock tires in the dirt. Might try some of these: http://www.farmandsandtoys.com/partdetail....artid=174\ Call me and i will more than gladly give you some tips for hooking up.. :beer:

If you want to go F.A.S.T. , then tweak what you have! There is plenty more you can get out of that bike with different components such as CPIs or Shearers, V Force, Cool head w/domes as im sure you dont have hardly any compression with a .030 cut head and that porting, gearing, more porting if needed, less timing, etc. etc. etc... IF you still think you need more i will more than gladly trade you out.

Ozzy, you can do as you wish with the advise but im telling you it runs alittle better with packing. Call any pipe manufacturer and see what they say. We have done it over and over and everytime I feel more torque. Just my .02

ouch, hope the wife is healing quick Dru! Take care of her first then worry about the results.