FASTOYS

lol, well i dont know bout that , guess we will have to see the outcome of the next race, bring your A game. jk Just curious is that a stock stroke 12 port?

Shawn , just get the paddles that will put you in FRONT of the Tractor instead of behind. jk :laugh: I think you will like the 22/11/8 10pdls !

Definetly the V Force. Also a timing plate would be a good/inexpensive mod to do!!

Here ya go: 6MM X 25MM (1 INCH) X 1.00 MM PITCH Any good hardware store should have some.

I would call Kevin and he will get you figured out. As always , it is best to go straight to the builder...

All the people we have sold 1211 to have really liked it over anything else. It is much easier to work with and seals great. We use it on cases, base and reed gaskets ( sparingly), etc.. Heres a tip for metal gaskets like stock head gaskets, etc. : Use some cheap silver spary paint as the metallic in the silver acts like copper coat but is much cheaper! :biggrin:

Yes you can. Beware the 4mm cranks w/only "out of the box welding" as we have had some issues with them. We RE-weld them for better penetration!

We keep them for both 2s and 3s if still needed.

I think Camatv had a used set of Shearers.....

We sell a ton of the K&S seal kits for Banshees with no troubles at all, but IMO i feel the OEM seals are probably a little better quality. EIther way we have you covered.

Glad you liked the outcome and that it was worth the wait! Give us a holler if you need anything else. :beer: Unfornatly we are not taking on anymore porting for a few months till we get caught up. Things are starting to slow up now so hopefully with lots of late nights and determination we will see the light.

I know a guy that has most all of it on hand. Wanna pick it up tonight?? :biggrin: bump

I would say keep it in the 4th clip down for now, try the 1/2 turn out and see if it will work. You may be fine with what you have . Yes we stock ALL jets!!!

Dont sweat it , we have seen hundreds of them just like that or worse run for years with no leaks.. Keep an eye on it from time to time for getting worse.

Fred do you have stock pilot or 27.5?? If stock pilot your air screw is too far out. Try 1/2 turn. May need to play with clip position on needle. ALWAYS start fat and work your way down. If stock needle i would think in the middle would work but we have had some that had to go lean (clip to top).

IF running stock pilot , turn air/fuel screw only 1/2 turn out. If it likes it but needs more i highly recommend 27.5 pilots. Prolly should run a 310-320 main with clamp on's, timing, and 40 degrees!!

We keep them on hand ... Not sure if you are the one that emailed me last night or someone else looking....? 785-364-5325

Congrats!! Looks like a nice family. Now all the fun begins... :beer:

Thank You Keil , glad we keep all that on hand and ready to go! Holler if you need any help....

Which jets/needles do you need?? http://www.farmandsandtoys.com/partdetail.asp?partid=73

IF you want "Genuine" then you will have to order Factory Yamaha$$$$, If you just want a decent rebuild kit with everything in it then we have an aftermarket one for like $15 each carb..

Not only are they good for possibly more HP/TQ but more importantly better response. I dont know anyone who rides a Banshee who isnt interested in better throttle reponsive. I have taken Banshees' with known good tuners (that swore on their life it was spot on synced) and was able to improve what they had! Do you have to have one?? No, totally up to you. But they are a really cool/handy tool.

How locally do you need it?? We are i think 1 day from you via ups .Located in Kansas and $95.. If someone has a Tusk clutch local then by all means grab it and go but if not give us a call and i will fire it out today.

Might be a good time to invest in a new ball and rod, pancake bearing, and new clutch. Tusk clutch seems good for the money or you could get the F.A.S.T. clutch and all your other parts at the same place. Give us a holler if we can help.

35s PWKs will work fine but 39PWKs on a drag motor will pick up hp and tq.!