FASTOYS

Ive used heli coils and had good luck on the cyl. studs. Bummer

There are 2 circlips on the drive axle shaft (the one with the sprocket), one Big one and one Small one. Then there is one Big one on the crankshaft (right side). As added security/strength, we often put an extra one on each big one but you dont have too. And yes i do carry em if needed.

Hey now im not the one invovled with the dogs. hehe

I like peanut butter, but not as much as Firehead.

Good looking bike!! Hope to meet up at LS sometime and see it in person.

Im pretty sure i have a long one. Ha that sounds cool uhhh i mean bad. lol Give me a call Friday afternoon when im in the shop and i will measure the 2 different adjusters and see.

Depending on where you want your power i would go with T5s, Pro Circuits, or SSTs, a fast trail port of somekind, cool head, timing plate, v force, and carbs IF you can afford them. Should make for a super fun bike. Might try to get your cyls inline before the mad rush hits as most builders are swamped around springtime on ....

NO , but you may also need a shift shaft IF yours has a groove in it and the seal doesnt fix it. The seal just pushes in!

To fit which filter may help...... You want to buy a USED outerwear? :ermm:

Well im not gonna go through all that either but i have a 10mm Cub stk frame bike i may let go of. Pm me if interested.

Im a big ol boy myself and know what it takes to get us big guys moving. Sounds like for your budget and type of riding i would go with a 4mm Play port, T5s, and 33 PWKs. This will have power everywhere and leave your 4 stroke buddies jealous. Check our website for pricing and ideas for your build. Give a holler if we can help.

You damn nutswinger. :laugh: Hey when you gonna get you azz up to LS and go sand slingin with us?!!

64.25mm or .010 over

I see, Definetly need to find out what is going on then huh?!! I was also gonna say Im sure NYUK prolly has a bucket of used ones , check with him.

IMO, it has all been addressed; Detonation, too loose of cyl. bore, cutting/weakining the windows, etc.. IF you have .006 cyl/to piston clearance i would think we would see ALOT more blowby past the rings then we see in the pic.. ALso it would sound like a rod knocking when you ran it (im exagerrating but it would be noticebly louder). Check your piston to head squish and make sure it is cut big enough for your BIG bore pistons. Example: 68 mm piston needs head cut out too 68.15 or so, so the piston has no chance of hitting the edge of chamber. I would not reccomend cutting your pistons Especially if it has already happened twice and breaks your cases. I dont think beating a cub is worth that $$$$$$$$$. Plus im sure if your beating a cub now you will still beat it without cutting the windows as i can promise you that is not what is putting you in the front but it sure is slowing you up when you have to buy new cases and tear it all down! :sad:

I have a used #1 but that prolly wont help ya. Why not buy new as it is only a $28 part??? I keep em if i can help and we are only a day away from you!

You do not need a lockup. Sounds like you have clutch issues of some sort. Maybe adjustment...

Kaos, should of got one of these for sure: http://www.farmandsandtoys.com/partdetail.asp?partid=193

Yes, please call me if you have any questions and I will get you lined out.

lol, sounds like we should get em together and get pics.

I can get you Benol if needed. Pm me.

About the same as this: http://www.farmandsandtoys.com/partdetail.asp?partid=314

May run even better if you turn the air screws in alittle more if your running stock pilot and at sea level. Gonna be hard to get the carbs synced with tors boxes on. With all the linkage crap in the middle they seem to get out of sync easier.

Glad you liked it, now gotta get that F.A.S.T. head and you will like it that much again! Thanks, Guys.

Anyone can port a motor and it will run its azz off on top end. Hell, i can have Loco port one and it will run better than stock. We are dealing with several more cases lately with motors from other builders not having any bottom end. Sounds like some of you may want to do more research! Have you talked with Passion to see if he can help you out or trade you out ??