FASTOYS

T5s are great all around pipes for duning, also consider CPIs and Shearers if you want more mid/top power.

Wiseco has .060, .080, .090, and .100 over size on the bigger sizes. They skip .070. Try to get a measurement on your bore and let us know what it measures...

Well thank you sir!! Hope you enjoy your lockup.

You lookin for this?? http://www.farmandsandtoys.com/partdetail.asp?partid=213

Well , its been running fine so what did you change??

Magz, which chain did you buy as i have been running the non o ring (we sell) on my 10mm alky cub and never had an issue. The X ring chain is even stronger yet. Have had the carriers move around and cause the chains to get loose and seem like they are stretching but it wasnt the chain. Wondering if you have other issues...? Pm me and let me know.

Can you take pics and email me ?? Springs, clutches etc. same as yours Tanner?? Maybe we had a mishap on clutches like we did with cables god i hope not. ha Did you get your new cables?

We had a batch of clutch cables that were off by a couple of #s and didnt catch it till the other day. I have been trying to call everyone back that had bought one to notify them. If you bought one from us within the last month or so and it DIDNT fit, shoot me a pm and i will gladly take care of you!!!! P.S. Im not sure why some people go to the dealerships anyway as we carry about anything you would ever need for a Banshee on hand and know the difference from a crossover tube and a heater hose. :biggrin:

They respond very well to mods. In stock form they are kinda of turds but with the right mods they really wake up. The right pipe, jetting, and gearing can make a big difference. Lemme know if i can help.

How far foward is it? How do you like the blown on insulation in your shop?

07 Up dont need the mod as they come with it. We do the mod for around $200 including all parts needed. High volume oil pump, oil squirter, milling/drilling/machining your clutch cover, clutch gasket, couple of o rings, etc...

came out in 07s We can do it relatively cheap if needed. Just have to buy a few 07 parts and do some modding to your clutch cover.

Dave you know you like my nuts, AND my kettle corn FBTs. :laugh:

Thanks guys, i appreciate the props as we try hard.

Call me, got a set of .030 over w/Wiseco Pistons, could run as is w/hone marks still. Can ship today = you have tomorrow. Straight gaskets surfaces, good threads, etc... $225 shipped

Its as easy as checking your sponsors at the top of the page...

I too have had several of our customer motors whip my butt and even pulled my own motor and sold it on the spot several times.

No problem Rollins BUT that one does NOT have the bigger adaptor like ours and you can buy other parts needed from us at the same time/place if needed to save on shipping!!!! Plus its always nice to help support HQ sponsors who help support this site!

You talking about the slide or needle and seats??? Stock Banshee carbs im assuming? We carry the rebuild kits for like 14.95..

Yeah ours works very well. You will have to take the airbox out to do it but its a one time thing and your done. Another tip is make sure to get rid of the Tors boxes on top of the carbs if you still have them. You will have a hard time keeping sync with all the linkage/crap in the Tors box!

Let me know if it doesnt sell as im interested!

Wasnt trying to be a jerk just thought it was funny..

Albert , you already had the answer why did you need to ask? 60-65 hp range It doesnt matter what it "dynos" it matters how it runs in the real world. I have rode 70hp bikes that got beat by 58-60hp bikes and the 60 hp bike was MUCH more fun to ride (better torque curve). I would dyno it at Little Sahara.

Rear shock is sold. Bump

Found some thanks!!!!