FASTOYS

I didnt say they couldnt run but stock for stock i prefer the 68 Cubs. We do them here Professionally and we dont have to send them back to replate after we port them.

Yep what he said.

We use and stock the Extreme Dunables with great results. 1-5 seems to work great for what your doing. Hollar if you want more info.

Life is too short, Glad he is doing better. Spend time with him as it goes fast.

Looks like you just answered your own question...Call herr!

Ive used them all and prefer to stick with Threebond 1211 as it is the easiest for me to work with. Looks like this: http://www.farmandsandtoys.com/partdetail.asp?partid=282

We sell/stock ModQuad products and Noss Products. They both make good stuff but on heads, i have my choice and prefer to run the NOSS/F.A.S.T. Heads. Besides, with the F.A.S.T. Racing Logo they pick up 3 bike lengths. jk Dave is a standup guy and we have been doing business for years with NO troubles, but we have had some troubles with other brands. Alf, are you stocking thier products?

Welcome to the HQ! Should be everything you need here and more.

Rotax Raptor pm me your phone #. Thanks Bobby, lemme know when the 1st dune trip is so we can hook up. Im due for a break, lol.

might pm Rotax Raptor on here as he has a nice R for around $4 something....

Thanks guys, had a good visit with Rotax Raptor. I think he was overwhelmed with what all we did and what all we carry for parts. lol He kept naming off parts..."you got one of these"? Yep. "One of these"? Yep. By the time i got to lunch around 2:30 i thought i was gonna fall through my a$$. You know, i gotta keep this fine tuned physic running?!! baawahahhahaha Cant wait to see Hilirious's Cases when they come in as he always sends the good FBT's (Fat Boy Treats). Glad you guys came by , thanks for the props everyone!

I think that after 4 times tearing the motor apart, still having the same problem, i would send it to a builder. Sounds like you have covered the basics but there must be something your missing. Famous quote: "You can go broke saving money"!

PM SENT

We can send them in for you and it usually runs around $300-350 range depending on whether it needs welded up or not. We send in a piston with them and have them set up to OUR specs/tolerance.

Couple of tips: You can grind/slot your adjustment slots on swingarm for more chain adjustment. Or you can run a bigger rear sprocket like 43/44/45 etc. BUT you might not be able to run a skid plate if you do the latter. 13/41 or 14/44 work good for Woods bike IMO.

Need to do all the bolt on's first. Timing plate, F.A.S.T. HEAD w/domes, V force, and then consider doing the true/weld and porting will be the next step. YFZs are no joke IF setup right. Same for the Banshee but most dont put the time/effort into jetting, gearing, and setup. Porting is where the BIG power comes in on the Banshee.

Whats wrong? I dont see the problem. Isnt that how your supposed to pack parts for shipping? NOT! You wouldnt beleive the parts i see come in from people. We get crankshafts sent in for true/weld that are in a box with NOTHING else and literally sticking out one end of the box and been out the other. We see cylinders in boxes with NO packing and some actually that got ruined, got a couple of shocks in a priority box the other day with NO packing and they had beat the crap out of each other and were sticking out the end of box. We have gotten motors in that were shoved into a milkcrate, and when they arrived they were hanging out the bottom and draggin on the concrete. People need to have common sense and pack stuff correctly..."WITH PACKING"!!!! Duhhhhhh

Yep , its prolly worn out and needs a bore job.

These are Nice: http://www.farmandsandtoys.com/partdetail.asp?partid=48 clamps; http://www.farmandsandtoys.com/partdetail.asp?partid=300

Trade for some Lectrons?? lol Free bump.

Yes call me when ready and i will figure out what you need. In the long run our is prolly cheaper anyway.

I didnt see 4mm cranks on his site and the cranks i did see are $1,000-UP. I dont think he's gonna buy one of those. I too have seen this first hand! The guy with 46 feedback seems to bid on everything...hmmm

Thanks for the props Alex but our 4mm cranks are only $435.00. http://www.farmandsandtoys.com/partdetail.asp?partid=78 If you want a Vitos or Magnum crank i will sell them even a bit cheaper but i dont run them in MY motor. We use Hot Rods Cranks!

Didnt answer mine!

Check with your HQ site sponsors as most of us carry them and some can get them for you.