aguita

hello guyz..i have my blue plastics and lot of chrmoe pics but still have the silver frame..and im going to PC the frame next week..i want some inputs about the colors..i was looking a metallic blue for the frame,black arms and silver swingarm? please help me decide! thanks in advance..if have pics better!

Hey whats up!? i just got my engine ported and i heard that i need to break in the engine b4 ride em hard? is this true??? i was told to make a couple of heat process using non syn oil and after that use syn oil..what is true about this?? i cannot reach my builder since i lost my phone :S..thanks

so most of you sayin that go with teh stock sprocket that is a 14 on the front and go with a 41 on the back..i changed my 14 to a 13 bc i was told that i gain acceleration with 1 less in the front..thanks for the inputs...any other ??

I need to change my rear sprocket and i will be changing the chain and the front too..what should i drop in there? i had the 14-40 stock one and changed to a 13 on the fornt..i mostly do drags and open road...which would b my best? im looking for the best Acc-top speed thanks!

ok ill do a plug chop myself tommorow and show some pics ..thanks

yea that is way low..but he rode my bike and told me that is pulling hard and the plugs looks fine!..yea im runnin mikuni....im a bit scared i dont wanna ride it till someone holla here

price and pics of the shocks..thatnks

hello... I want to know which jets should i be running with the mods that i have on sig...im looking to remove my airbox and put some pods..im running mostly @sea level or 800ft temp 80-90..my bike is ported by a guy that is very reputable here in my country and have one of the fastest shee around and has built fastest shees here ,He ade me the same port that he did on his bike with the same mods that i have..and he told me that he put some 240 mains on my bike!! i was like WTF 240! and he told me that he made the plug ch

how much for the cyls alone only the cyls?

i have a rodeo 2002 and i had the check engine light on.i replaced a 02 sensor and the light went off,2 days after i change it it came on again,the shop told me that is another 02 shot..but i got a code reader and saw that is some low voltage on the o2 sensor on block 2 sensor 1..im getting it to the shiop againm tommorow

I contact this guy to ask him about his porting and he charges 175 FOR BOTH cylinders...pretty decent price..and he guar0atee that u wont be dissapointed!

so the price is 175 for BOTH cyls or each..on the site says each but u told that u got it from ebay?? so..what is the real price??

cuz premium fuel here in my country is SHIT..i think that premium fuel here is like 83 octane ! and i get knock when using premium fuel..so i prefer expend a couple $ more to b on the safe side

here in my country the PREMIUM fuel is like the regular shit on ur country..even so badly that the goverment had to pay like to 1,200 drivers they fuel pump that got fucked...i was using the premium fuel the other day and the engine was knokng so i run 50/50 to prevent do you realize that fuel also play its roll on making power on engines???? Wallrat: yea u got me rite..i want to get the lowest octane w/o detonation like i mentioned the fuel here IS SHIT so i was getting detonation when using the fuel of some pumps so i better b on the safe side than on the wrong...also i dont run fully race fuel i mix50/50

i can get racing fuel VP for cheap and theres one that says that is designed for stock and modified 2-strokes applications.makes 6% more power than pump gas and any basic nonoxygenated racing fuel. Makes engine s faster and more responsive without harming the carburator,o-ring, or gaskets the Octane of this fuel is 101 based not on RON octane is based on MON octane!? so i guess i could use it ?? so or i should keep using the Unleaded 101 that doesnt says that is for 2-stroke but i get alot of power and i feel the difference from premium or can i use methanol?