cbn70

Interesting, I just had my 250r on the dyno and there were nice gains to be had with the programable ignition. So I thought another trip to the dyno with the banshee and test it out with the programable dyna.

Does anyone have a link to or know what the stock banshee ignition curve looks like. What about some modified curves, I am thinking of getting a dyna programable ignition and wanted a few curves to try out and see what works the best. Just for reference my banshee has plus 4 ignition on it now, stock port cylinders, fmf gnarly pipes, 28 pwk carbs, boysen reeds, case porting, and cylinder head has been cut for more compression.

what klind of riding are the cylinders ported for

thanks for the replies, found a set

I am looking to get a set of stock banshee cylinders. What do you have. Don`t mind if they need to be bored out, but not on the last bore. thanks

excellent

What is the biggest carbs that will work with the stock thumb throttle. Will a set of 35mm pwk`s work or do I need a different thumb throttle. thanks

Hi looking for a rear brake pedal with mounting hardware, coils with mounting, overflow bottle, shiftlever,rear brake rotor with mounting bolts. I think that is it. would like to buy from 1 person so I don`t get killed on shipping. This stuff needs to be shipped to Canada as well. thanks

Hi Looking for black tank plastic and black rad plastic. What is out there???

thanks for the replies, found a set.

need front brake calipers off a 92 or newer banshee. what do you have. Would need to be shipped to Canada

Sounds like I nee to switch to a 8 inch rim. Currently I have 20x10x10 8 paddle haulers. Maybe 20-12-8 8 paddle is the way to go

Hi, I have been reading some of the comments on paddle tires and rim sizes. What are the reasons for running the 8 inch rims as opposed to a 9 or 10 inch rims. Some people seem to think a 8 inch rim is better, will give a bike or 2 lengths difference when drag racing as opposed to a 10 inch rim. thanks

do you still have the dune port cylinders, can you send me some pics. What kind of pîpe and carb set up are they ported for. what kind of head did you run with the set up

I lost my manual, and need help. What is the correct stator check out procedure. I had one of the screws on the stator come loose and break a wire or 2. All soldered back together, but just want to check it out before I re install it. thanks