Toybreaker

I was out of town until pretty late last night. I will get back to everyone in the order posted/pm'd with shipping prices. Nothing has sold yet. no payments are pending and the prices listed are pretty "close" to the lowest I will take. I am not looking for any trades unless you have 1970 mustang parts, or superduty diesel parts

If a zilla was available when i bought my first banshee I would have bought it instead. When you do all the Dr. Q mods, zilla's are reliable and make insane power. Also when you mod the zilla to make huge power it is not a light switch. the power curve doesn't look like a Pyramid it actually has a curve. All mods being equal there is no replacement for displacement. You stroke the banshee and the LT500 the same amount the LT wins You optimize carb size and jetting for both bikes the LT wins You port both for low/mid/top end (take your pick) the LT wins Unless both bikes are modded close to the same its apples to oranges sure there are banshee's that can beat LT500's but are they running a stock stroke crank? Have a factory jug? ported vs non ported? Dudes 580 lt has 40% more than stock displacement. anyone have a 420 banshee that will race this guy? At a dirt, sand, or Asphalt drag strip. that way we can see the posted time slips and possibly see video?

Roll design wide pegs (best offer plus shipping) Front shock (the other one looks the same) Aluminum front bumper $50 plus shipping Front suspension right side Left side I have some boxes and packing material but not enough for everything. I'll do my best to keep the shipping costs as low as possible I can ship 1 set of paddles without buying boxes but the second set to sell will have to pay for the boxes. If I quote you a price for shipping and it is more than that I will eat the difference. If it is less by more than $3 I'll refund it (Nearest ups store is 9 miles away and Diesel is $2.80 a gallon here)

Radiator and gas tank plastics $15 each or both for $25 plus shipping Black and red seat. Dirty from being outside but not dried out or torn. $50 plus shipping White rear plastic

Dune runner 22X8X10 Dune tracker 22X8X10 Dual pattern Banshee and Suzuki LT250R Sand Skate II's 20X11X10 Sand Stars 20X11X10 On ITP rims not blue labels $90 plus shipping

I have access to the equipment and the skills to make the carrier holder as well as Tig weld it, and the tightening sleeves to the stock swing-arm. What i need is the Outside Diameter Dimension and width so i can form the sheetmetal and then weld it all up. Can anyone help me out?

Reeds, check the reeds first.

Skate II's are 90% Stars are 98-99% (they were on my wifes bike) Fronts are Kenda "razors" all wheels are mounted on Douglas blue label .125 rims with no bends. all the rest of the parts are mounted on my abandoned Drag bike roller. I will post pics of the paddles I forgot to list the 2000 red/black seat. I don't remember if it was whole or if it had a tear. I'll post pics of that and the red radiator/tank plastics as well.

Let me find out the shipping I'll get back with you tomorrow via PM .125 douglas rims. Blue labels If I still lived near the dunes I would be using them. they aren't new, they aren't shiny (I am too lazy to shine them) and they aren't bent.

2003 A arms - ball joints/threads in good repair. no hardware $120 Plus shipping 2003 Shocks - even better shape than the A-arms, yellow springs $ 55 Plus shipping Tie rods - with castle nuts. threads good $ 25 Plus shipping 1998 spindles - no damage to the threads or ball joint bores $ 40 Plus shipping 1998 front rotors and hubs - no damage to the wheel studs $ 50 Plus shipping 1998 Steering stem - Straight $ 30 Plus shipping 2000 White Rear plastic. $ 50 Plus shipping Axle - good splines and threads with nuts $ 60 Plus shipping Rear hubs - Good threads and splines $ 25 Plus shipping Rear brake rotor - straight, never been machined good splines. $ 25 Plus shipping Sprocket hub - 4 finger w 41 tooth sprocket $ 15 Plus shipping motor mounts $ 15 Plus shipping Dog bone $ 15 Plus shipping Stock carrier - with adjusting hardware $ 50 Plus shipping Front sand tires on blue label rims $ 60 Plus shipping (2 sets available) rear sand stars 22x10x10 (I think) 6 trips to glamis on blue labels $ 75 Plus shipping Sand Skate II's 20x11x10 on blue labels $ 60 Plus shipping Willing to work on combo deals. All shipping charges will be ACTUAL packaging and shipping cost. A receipt will be packed in the package with your item. All prices are negotiable, Plus shipping.

I have a roller. where are you at?

PM sent never mind you can't recieve PM's.... pm me or email to lee@violetspringdesigns.com

I have been once. In april 09. I had a good time until i hit a big puddle and sucked in some water. from what the guys that i work with told me the dragstrip is almost done. Barrier walls, timing lights etc. I am not going back until i have an airbox cover to minimize the water ingestion.

email sent

1998 a-arm frame powdercoated blue with ca title $125

35 PWK's are sold 34 Mikuni's are sold Boots are sold Intakes for 34-?? mm carbs still available, make offers V-force reeds, have an offer pending, waiting for payment Had some questions about the roller. Yes i will sell it whole Has been raining a lot here in South Carolina and my back yard is a swamp. It needs to dry up a bit before i can get to the shed I'll post pics on a new thread with shipped prices.

It isn't a stock banshee shock. It was reworked by a suspension company in san diego in 2004, for a banshee setup to go over the whoops with a 200lb rider. PM me you email and i will send you some pics. $85 shipped only pic with the shock i have right now

All my parts in this ad and the rest of my project bike is going on ebay in the next couple of days. had a bad day at work so I am just going to list everything and ship it off to the highest bidder. reserve auctions of course.

No trades unless you have 1970 mustang parts. Reeds are ready to bolt on and go. Petals are in good shape. They have about 30 hours on them (one weekend in the dunes)

Like it says, V-force II's $100 plus the ride 35mm pwk's Left carb has been capped and welded to clear the clutch arm so these carbs will work WITHOUT carb spacers. both carbs, intakes, and boots to mate to a stock airbox $250 plus the ride Carbs only $200 plus the ride 34mm round slide keihins carbs with throttle cable Intakes in picture go with the PWK's $170 shipped\ All prices are NEGOTIABLE All reasonable offers will be considered. Also getting ready to part/sell my 1998 titled roller with a plus 12 stock carrier swingarm.

$100 plus the ride

Stock axle nut to nut with everything (hubs, rotor and brake hub, sprocket and sprocket hub) $155 shipped will sand blast everything, prime and paint it grey or black for an extra $20. All threads are good and hubs come with lug nuts

I have a 1998 with california title in my name. A roller minus brakes with a 12 inch over swingarm actually. But going to part it. Where in New york? I am driving to Boston soon might be able to work out a meet in the middle of my route thing. $200 Plus the ride if we can't work out the delivery meet and greet

During the move the contractors lost a rear wheel to my wifes banshee. I need a replacement. At least 50% tread tire with a silver rim that holds air.